Hubbell Power Systems

Channel 48" Neutral Section
Channel 48″ Neutral Section

Cast-in dimples at bottom of channel to attach installation chair

NCI SKU: AC5490

$69.51 Add to cart
Channel End Cap Close Inlet
Channel End Cap Close Inlet

POLYCAST® Universal Male End Caps are used to enclose or provide 4” pipe inlets to the female channel ends. Inlets accommodate 4” pipes.

NCI SKU: AC5665

$17.88 Add to cart
Channel End Cap Close Outlet
Channel End Cap Close Outlet

POLYCAST® DG0670 Grate is a high density polyethylene slotted
grate appropriate for corrosive applications or where sanitary
conditions are necessary. Provides excellent chemical resistance
and durability. Polyethylene construction helps protect bare feet.
Grating locking device Part No. DA0642 (not shown) should be
used and maintained secure. The grate has 18% (18 in²) of open
area. The grate weighs approximately 4lbs [1.81kg] and is only
available in 24″ [610mm] length.

Open Area: 11 in2 /Linear Foot
Dimensions: 5-1/4” x 24”
Weight: 4 lbs.
Slot Size: 0.32″ x 2.95″
NOTE: Part No. DG0670G
available, color: gray

NCI SKU: AC5678

$26.89 Add to cart
Channel End Cap Closed
Channel End Cap Closed

Drain end caps are available for 3” PVC pipe. Solid end caps are also available toseal off the ends of the channels.

NCI SKU: AC5663

$22.81 Add to cart
Channel End Cap Drain 3"
Channel End Cap Drain 3″

Drain end caps are available for 3” PVC pipe. Solid end caps are also available toseal off the ends of the channels.

$29.18 Add to cart
Channel Female Adaptor
Channel Female Adaptor

Male and Female Transition Devices (699F & 699M) are available
where channel runs are in opposite directions and two channels
are set either female to female or male to male. A female
transition piece (699F) is used to fill the top space of the female
to female joint (this applies to 600 Series only). An epoxy grout
or urethane sealer can be used to smooth over the gap on the
inside bottom of the channel. A male transition piece (699M) is
used to lap under the male to male joint.

NCI SKU: AC5705

$30.47 Add to cart
Channel Grate 48" Slotted Galv.Stl
Channel Grate 48″ Slotted Galv.Stl

4′ Slotted Grating

NCI SKU: AC5668

$56.08 Add to cart
Channel Grate Galv Steel 24"
Channel Grate Galv Steel 24″

Open Area: 10.2 in2
/Linear Foot Dimensions: 5-1/4” x 24” or 48”
Weight: 4 lbs. or 8 lbs.
Slot Size: 0.28″ x 3.00″

NCI SKU: AC5680

$31.51 Add to cart
Channel Grate Sloted Galv Steel
Channel Grate Sloted Galv Steel

Open Area: 10.2 in2
/Linear Foot Dimensions: 5-1/4” x 24” or 48”
Weight: 4 lbs. or 8 lbs.
Slot Size: 0.28″ x 3.00″

NCI SKU: AC5670

$42.54 Add to cart
Channel Installation-Chair
Channel Installation-Chair

The POLYCAST
Installation Chair is
the most efficient and
economical means of setting
a precast trench system. The
installation chair supports the ends of
the channels, aligns and locks the joint rigidly
together, and prevents the channels from floating.
Adjusting channel elevation is easy with the
POLYCAST Installation Chair.

NCI SKU: AC5683

$13.58 Add to cart
Channel Lock Device F/Ci Grate
Channel Lock Device F/Ci Grate

Open Area: 19.8 in2
/Linear Foot Dimensions: 5-1/4” x 24”
Weight: 15 lbs.
Slot Size: 0.50″ x 4.19″

NCI SKU: AC5695

$4.75 Add to cart
Channel Lock Device F/Poly Grate
Channel Lock Device F/Poly Grate

Grate hold-down devices are to be used with all grating systems where wheel traffic occurs. This is necessary to provide system integrity

NCI SKU: AC5692

$4.75 Add to cart
Channel Male Adapter
Channel Male Adapter

Male and Female Transition Devices (699F & 699M) are available
where channel runs are in opposite directions and two channels
are set either female to female or male to male. A female
transition piece (699F) is used to fill the top space of the female
to female joint (this applies to 600 Series only). An epoxy grout
or urethane sealer can be used to smooth over the gap on the
inside bottom of the channel. A male transition piece (699M) is
used to lap under the male to male joint.

NCI SKU: AC5700

$30.47 Add to cart
Grate Hold-Down Device
Grate Hold-Down Device

One hold-down device is recommended C per every 2′ of grating.

NCI SKU: AC5688

$4.72 Add to cart