Channel 48" Neutral Section
Channel 48″ Neutral Section

Cast-in dimples at bottom of channel to attach installation chair

NCI SKU: AC5490

$69.51 Add to cart
Channel End Cap Close Inlet
Channel End Cap Close Inlet

POLYCAST® Universal Male End Caps are used to enclose or provide 4” pipe inlets to the female channel ends. Inlets accommodate 4” pipes.

NCI SKU: AC5665

$17.88 Add to cart
Channel End Cap Close Outlet
Channel End Cap Close Outlet

POLYCAST® DG0670 Grate is a high density polyethylene slotted
grate appropriate for corrosive applications or where sanitary
conditions are necessary. Provides excellent chemical resistance
and durability. Polyethylene construction helps protect bare feet.
Grating locking device Part No. DA0642 (not shown) should be
used and maintained secure. The grate has 18% (18 in²) of open
area. The grate weighs approximately 4lbs [1.81kg] and is only
available in 24″ [610mm] length.

Open Area: 11 in2 /Linear Foot
Dimensions: 5-1/4” x 24”
Weight: 4 lbs.
Slot Size: 0.32″ x 2.95″
NOTE: Part No. DG0670G
available, color: gray

NCI SKU: AC5678

$26.89 Add to cart
Channel End Cap Closed
Channel End Cap Closed

Drain end caps are available for 3” PVC pipe. Solid end caps are also available toseal off the ends of the channels.

NCI SKU: AC5663

$22.81 Add to cart
Channel End Cap Drain 3"
Channel End Cap Drain 3″

Drain end caps are available for 3” PVC pipe. Solid end caps are also available toseal off the ends of the channels.

$29.18 Add to cart
Channel Female Adaptor
Channel Female Adaptor

Male and Female Transition Devices (699F & 699M) are available
where channel runs are in opposite directions and two channels
are set either female to female or male to male. A female
transition piece (699F) is used to fill the top space of the female
to female joint (this applies to 600 Series only). An epoxy grout
or urethane sealer can be used to smooth over the gap on the
inside bottom of the channel. A male transition piece (699M) is
used to lap under the male to male joint.

NCI SKU: AC5705

$30.47 Add to cart
Channel Grate 48" Slotted Galv.Stl
Channel Grate 48″ Slotted Galv.Stl

4′ Slotted Grating

NCI SKU: AC5668

$56.08 Add to cart
Channel Grate Galv Steel 24"
Channel Grate Galv Steel 24″

Open Area: 10.2 in2
/Linear Foot Dimensions: 5-1/4” x 24” or 48”
Weight: 4 lbs. or 8 lbs.
Slot Size: 0.28″ x 3.00″

NCI SKU: AC5680

$31.51 Add to cart
Channel Grate Sloted Galv Steel
Channel Grate Sloted Galv Steel

Open Area: 10.2 in2
/Linear Foot Dimensions: 5-1/4” x 24” or 48”
Weight: 4 lbs. or 8 lbs.
Slot Size: 0.28″ x 3.00″

NCI SKU: AC5670

$42.54 Add to cart
Channel Installation-Chair
Channel Installation-Chair

The POLYCAST
Installation Chair is
the most efficient and
economical means of setting
a precast trench system. The
installation chair supports the ends of
the channels, aligns and locks the joint rigidly
together, and prevents the channels from floating.
Adjusting channel elevation is easy with the
POLYCAST Installation Chair.

NCI SKU: AC5683

$13.58 Add to cart
Channel Lock Device F/Ci Grate
Channel Lock Device F/Ci Grate

Open Area: 19.8 in2
/Linear Foot Dimensions: 5-1/4” x 24”
Weight: 15 lbs.
Slot Size: 0.50″ x 4.19″

NCI SKU: AC5695

$4.75 Add to cart
Channel Lock Device F/Poly Grate
Channel Lock Device F/Poly Grate

Grate hold-down devices are to be used with all grating systems where wheel traffic occurs. This is necessary to provide system integrity

NCI SKU: AC5692

$4.75 Add to cart
Channel Male Adapter
Channel Male Adapter

Male and Female Transition Devices (699F & 699M) are available
where channel runs are in opposite directions and two channels
are set either female to female or male to male. A female
transition piece (699F) is used to fill the top space of the female
to female joint (this applies to 600 Series only). An epoxy grout
or urethane sealer can be used to smooth over the gap on the
inside bottom of the channel. A male transition piece (699M) is
used to lap under the male to male joint.

NCI SKU: AC5700

$30.47 Add to cart
Clevis Grab Hook
Clevis Grab Hook
  • 11-516G7H 5/16 WLL: 4,700 Lbs.
  • 11-38G7H 3/8 WLL: 6,600 Lbs.
  • 11-12G7H 1/2 WLL: 11,300 Lbs.
  • $6.62 Add to cart
    Coat Parka Lime
    Coat Parka Lime

    2″ Silver Reflective Tape On Front and Back Heavy Insulated High Visibility Lime Mid-Length Coat
    Collapsible Hood with Drawstrings For Added Versatility
    Reinforced Seams For Strength And Durability

    Sizes Available: L – 4Xl

    NCI SKU: GC1650-GC1650XXXXL

    $53.25 Add to cart
    Combination Gas and Vapor Cartridge
    Combination Gas and Vapor Cartridge
    • The North Safety 75SCP100 multi-purpose respirator cartridge is designed for use against Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Methylamine and Formaldehyde vapors. This cartridge also includes a built in P100 particulate pre-filter.
    • P100 respirator cartridges are NIOSH certified to have filter efficiency level of 99.7% or greater against oil and non-oil based particulates
    • The North 75SCP100 cartridges can be used with any North Safety full or half-face mask respirators. Package contains 2 cartridges. North respirator masks sold separately.

     

    NCI SKU: GC1336

    $26.32 Add to cart
    Concrete Mover With Rebar Hook
    Concrete Mover With Rebar Hook

    The Razor-Back concrete mover is designed to move and level concrete. The wide design helps spread the material evenly. The hook allows you to position rebar as concrete is forming. It is a heavy-duty rake that is great for contractor and professional use, as well as serious homeowners.

    Strong wide head
    North American hardwood handle for strength and durability
    Contoured handle provides a comfortable grip
    Strong head connection for years of use

    Width: 4.625; Height: 60.5; Length: 1.25

    $14.18 Add to cart
    Concrete Sealer
    Concrete Sealer

    High solids, rubber-base coating, available either clear or pigmented. Acid and alkali resistant, it may be applied over acrylic curing compounds without acid etching.

    Clear

    55 gal. drum or 5 gal. pail

    Pigmented

    NCI SKU: BS1150

    $186.95 Add to cart
    Cone Bar Expands
    Cone Bar Expands

    Size: 3’To 6′ Yello/Blk Rfl

    NCI SKU: GC1490

    $26.70 Add to cart
    Cone Stablizer Ring
    Cone Stablizer Ring

    This 7lb weighted base fits over a traffic one to provide additional stability.

    $12.33 Add to cart
    Converter Plate Adapter (4 Hole/2Hole)
    Converter Plate Adapter (4 Hole/2Hole)

    Converter must be used with the EZY-Tilt

    $22.94 Add to cart
    Corner Light LED
    Corner Light LED

    Four 3-watt LEDs

     

    NCI SKU: GL1431

    $122.19 Add to cart
    Cotton/Polyester Glove, Knit Wrist Cuff
    Cotton/Polyester Glove, Knit Wrist Cuff

    Brown Jersey, standard weight poly/cotton

    Knit wrist for a better comfort

    Clute cut

    Straight thumb

    Applications: manufacturing, general labor, material handling, shipping/receiving, agriculture, cleaning and Landscaping

    NCI SKU: GG1050

    $1.17 Add to cart
    Crescent 18-Inch Adjustable Wrench
    Crescent 18-Inch Adjustable Wrench

    Wide tapered handle of forged alloy steel and heat treated for toughness and durability.

    All dimensions proportioned for greatest strength and minimum weight. Chrome plated finish resists rust and corrosion.

    Used by professional mechanics, industrial tradesmen and home mechanics.

    Legth: 18″

    Jaw opening: 2 1/16″

    NCI SKU: EW1275

    $105.88 Add to cart
    Cup Dispenser Designed For Water Coolers Uses 4 Oz Or 6 Oz Paper Cups
    Cup Dispenser Designed For Water Coolers Uses 4 Oz Or 6 Oz Paper Cups

    Customers also search for: Holders; Water Coolers; Coolers; Drinks; Beverages; Cafes; Cafeterias; Hospitality; Restaurants; Stations, Discount Water Cooler Cup Holder, White, 6/Carton, Buy Water Cooler Cup Holder, White, 6/Carton, Wholesale Water Cooler Cup Holder, White, 6/Carton, 071691403074, 825706WHT Paper Food Trays.

    NCI SKU: ED1140R

    $11.35 Add to cart
    Cured Concrete. Medium aggregate - For fast cutting slate and glacial rock or limestone with dull sand.
    Cured Concrete. Medium aggregate – For fast cutting slate and glacial rock or limestone with dull sand.

    Product Details

    • C0.6S Slicing Disc – Straight Cut
    • 0.6mm Slice
    • Not to be used with Grids
    • Stainless Steel – Dishwasher Safe
    • Measures: 200 x 200 x 30mm
    • Delivery: 2 to 3 days
    • Fits: TRS Veg Prep Machines
    • Fits: TRK Combined Slicing and Cutters

    NCI SKU: EB1576N

    $285.61 Add to cart
    Curing White Md
    Curing White Md

    SureCure 25 is a pigmented, ready-to-use, acrylic rubber copolymer for curing and sealing of concrete slabs. Specifically designed for interior, exterior concrete, and masonry floors, SureCure 25 imparts a pleasing color with a degree of opacity, which obscures variations in the color of the concrete due to poor placement and/or finishing.

    Type 275 Gal Tote

    NCI SKU: BC1375

    $1,243.00 Add to cart
    Curing White Md
    Curing White Md

    SureCure 25 can be used on new or aged concrete surfaces to provide a durable, long lasting membrane that is resistant to abrasion, chemicals, paint, oil, and grease. Surfaces to be treated can be damp or dry; interior or exterior.

    Type 5Gal/Can

    NCI SKU: BC1365

    $33.55 Add to cart