View cart “6″x6″ 1/2″ R Cement Edger W/Wood Handle” has been added to your cart.
Flexible Vibrator Shaft with Quick Disconnect Coupler
Oztec Concrete Vibrator 21′ FS 21 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec power units, are reversible (doubling their service life), and come supplied with “quick change” adapters
$130.32 – $300.96
Floor Industrial Squeege
Floor squeegee that features a high performance gray EPDM rubber blade that resists marking floors. The blade exhibits excellent chemical resistance and high and low temperature properties. This is one of Haviland
14 gauge red powdered-coated frame
1/4” x 2” EPDM rubber compound resistant to most animal and vegetable products and by-products
A hard gray rubber blade is available
Engineered for superior push/pull performance
All steel frame with rounded corners for protection and safety in shipping
Straight frames are equipped with a built in scraper
Socket accepts a standard 1 1/8″ tapered handle
T-66, CE-100, and PCT-97 sockets are also available
The refill blade is the 1900 Line
NCI SKU: ES2625
$16.27
Hand Tying Tool (Manual)
The original wire tying tool. Speed, ease of use, and economy make this tool one of our best sellers.
$2.83
Hi-Craft Vinyl Knife
Lets you easily make even, accurate cuts in hard core vinyl or softer materials
Extra heavy sharp point, made of carbon steel
$4.88
Mag Screed
- Made of Genuine Extru-Lite Magnesium – 30% lighter than aluminum
- Built for strength and rigidity
$243.29 – $357.48
Magnesium Screed
- Made of Genuine Extru-Lite Magnesium – 30% lighter than aluminum
- Built for strength and rigidity
$153.92 – $182.05
Metro Mix #240 Air Entrained
Structural applications and full depth repairs:
Highways
Structural piers
Bridge decks
Balconies
Parking garages
Slabs
Industrial floors
Foundations
NCI SKU: AM1240AE
$12.51
Molded Rubber Floats, 8-Inch x 4-Inch
Apply firm even pressure as you glide this coarse cell float over the plaster coat to level and perfect surface irregularities. The float can also be used to create a distinctive dense texture to the finish coat. The rubber float pad is securely cemented to a flat aluminum backer for durability when pressure is applied. A 7-1/4 inch textured plastic float handle provides a comfortable sure grip to this 8 inch by 4 inch float. Proudly made in the USA. Kraft Tool Co.® has been an American manufacturer of quality hand tools for the concrete, masonry, asphalt, plaster, drywall, tile, floor covering, and leveling trades for over 30 years.
- Creates a dense texture on finish coat
- Smooth the base coat to avoid irregularities
- Strong aluminum backing
- Textured plastic handle
- Made in the USA
NCI SKU: EF1190
$8.19
Pot Pouring For Crack & Joint
Superior to any other brand on the market
OL America’s favorite “cracK Pot,” for crack and joint filling. Redesigned, now made of 20 gauge steel, stronger construction yet total weight of pot is lighter. Adjustable 3 size pouring nozzle. non-drip finger-tip control valve. worker walks facing traffic with stream of oil in plain sight, under instant control. All welded construction, can be burned clean repeatedly. Features leg stand that eliminates material spillage when pot is not in use.
Specs
- weight 6 lbs. 10 oz.
- Capacity 2 gallons
- Pot 8” dia. x 17” high
- Overall height 27”
NCI SKU: EP3125
$84.96
Rebar Cap Osha Approved
Specs
Type: Rebar Fail Protection
Material: High Density Polyethylene
Color: Orange
NCI SKU: GB1050N
$1.62
Rebar Steel 20′
SKU#: |
NCI SKU#: |
Size: |
#3 GR-40 |
AR1050 |
3/8″ X 20′ |
#4 GR-60 |
AR1075 |
1/2″ X 20′ |
#5 GR-60 |
AR1100 |
5/8″ X 20′ |
$3.99 – $10.33
Rebar Tie Wire PVC Coated
American Wire Tie was the first to introduce PVC coated Rebar Tie Wire to the construction industry. For use with epoxy-coated rebars, our yellow PVC wire is produced to the highest standards and quality, with a minimum of 7 mil thickness to prevent cutting the epoxy coating. Packaged with 20 3# coils to a 60 lb. carton.
Available by the roll or carton.
$7.21
Rub Brick
Fluted design provides sharp edges to help with stubborn material while moving away excess debris
Preferred by finishers for fast and easy concrete smoothing
$14.09
Steel Concrete Vibrator Head
Oztec HP 150 OZ 1″ x 14″ Vibrator Steel Pencil Head produces the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec’s electric or gasoline powered motors and choice of flexible shafts. The results are exceptional!
$196.56