View cart “12 oz Heavy-Duty Vinyl-Coated Nylon Double Sided Load Banner” has been added to your cart.
SIGN WORK VEHICLE FREQUENT TURNS 48X18 .063 B/O DG
SIGN WORK VEHICLE FREQUENT TURNS 48X18 .063 B/O DG

Work Vehicle Frequent Turns sign. Made of .063 aluminum with fluorescent orange diamond grade reflective sheeting and black letters.  Size 48″x18″.   Meets Virginia DOT specification G20-V1a.

**This sign replaces the old “Do not follow” G20-V1 specification.  All old signs must be replaced with “frequent turns” G20-V1a signs by July 1st, 2017.

NCI SKU: SG2020D  Sign Layout G20-V1a

$65.00 Add to cart
Sign, Base Hardware pack of 4 bolts and plastic anchors

Multi-Purpose Anchor Kit, contains 4 each: 3” Plastic Anchors, 4” Lag Screws, Metal Washers

NCI SKU: GS1215

$7.20 Add to cart
Slow Moving Vehicle Emblem
Slow Moving Vehicle Emblem

During daylight, the bright fluorescent orange solid triangle in center of SMV emblem is highly visible. Gains attention and recognition of approaching motorists at distances exceeding 1/5 mile. At night the red retro reflective conspicuity tape border glows brilliantly in path of approaching auto headlights. Meets ASAE standards. Hollow red triangle immediately identifies a slow moving vehicle. Meets new regulations.

NCI SKU: GE1085

$4.81 Add to cart
Speed Bump
Speed Bump

The Easy Rider® speed bump is available in 4′ and 6′ lengths. End caps are available to protect the speed bump ends and vehicles. Easily installed on asphalt with rebar spikes or concrete with lag bolts and lead shields.  Installation hardware is sold separately.

  • 100% recycled rubber
  • Reduces speed to 2-5 mph
  • Molded highly reflective tape
  • Product can be installed in sections to create varying lengths
  • Will not warp, crack, chip or rot
  • Channeled bottom for cabling and piping
  • Warranty: 3 years on the product; 1 year on the tape (under normal use)

 

SKU#: NCI SKU#: Info: Installation
24111 GB1470N 4′ Speed Bump w/ yellow tape 3 spikes needed
26111 GB1475N 6′ Speed Bump w/ yellow tape 4 spikes needed
26999 GB1476N Speed Bump End Cap 1 spike needed
91400 GB1460 14″ Rebar Spike for asphalt use
91500 GB1476N 6″ Lag Bolt for concrete use
91501 GB1476N Lead Shield for concrete use
$2.09$136.80 Select options
Speed Hump
Speed Hump

The Safety Rider® V mini speed hump is an economical speed reduction device made from vulcanized rubber. Unlike asphalt, the rubber mini hump is molded to spec creating a uniform and reliable solution to slow vehicle traffic. The mini humps are simple to install and do not require road closures or ideal weather conditions. Installs with lag bolts, washers, and shields which are included with the product.

  • 100% recycled rubber
  • Dimensions: (L) 35.4″ x (W) 19.7″ x (H) 2″
  • Interlocking tongue and groove system
  • Molded highly reflective tape
  • Product can be installed in sections to create varying lengths
  • Will not warp, crack, chip or rot
  • Warranty: 3 years on the product; 1 year on the tape (under normal use)

 

SKU#: NCI SKU#: Info:
23500V GH1945 Speed Hump
23501V GH1946 End Cap (female)
23502V GH1947 End Cap (male)
$59.40$70.20 Select options
Square Sign Post
Square Sign Post
  • Compatible with all existing square posts
  • Mating tube sections allow for fast, safe, ground-level installations
  • Ground anchor posts allow for rapid replacement installations when necessary
  • Square tube sections provide superior resistance to wind and other forces over U- channel or round posts
  • The Ulti-Mate Sign Support System provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware
  • FHWA approved as meeting safety requirements for sign supports
$26.01$63.75 Select options
SS90 TMA (Truck Mounted Attenuator)
SS90 TMA (Truck Mounted Attenuator)

The SS90HD is a heavy duty, potentially reusable truck mounted attenuator (TMA) available for use on stationary or moving shadow/support vehicles. This TMA has passed all mandatory and optional testing and is NCHRP Report 350 Test Level 3 compliant. Additionally, the SS90HD has passed the UK TD 49, 110 km/h (68 mph) test.The unit is comprised of two light-weight aluminum cartridges contained in a potentially reusable galvanized support frame. The SS90HD helps to absorb rear-end impacts at speeds up to 62 mph (100 km/h) when impacted according to NCHRP350 crash test standards.

 

Specifications

– 13’2” (3.98m) length from back of truck

– 93” (2.36m) wide – 1996 lbs (906 kg)

– 12” (3055 mm) road clearance

– 16,090 lbs (7300 kg) minimum support vehicle weight

$18,569.00 Add to cart
Standard Fast Dry Waterborne Traffic Marking Paint
Standard Fast Dry Waterborne Traffic Marking Paint

A user friendly, high solids, fast drying waterborne traffic paint suitable for application by airless or air atomized equipment. May be used to stripe roadways, airports and parking lots with or without pressure applied glass beads. It offers all of the benefits of a water reducible paint, and quickly dries to a no track condition. Performance and color properties of this paint meets TT-P-1952E Types I & II.

$73.65$76.10 Select options
Standard Vinyl Highway Safety Traffic Warning Flag
Standard Vinyl Highway Safety Traffic Warning Flag
  • Ideal for roadside construction signs and for directing traffic
  • Open Mesh flags
  • Reinforced Vinyl

 

NCI SKU: GF2125

$4.35 Add to cart
Stencil Handicap Large 39″ Duro
Stencil Handicap Large 39″ Duro

Stencils are produced from the best grade of polyethylene plastic you can use for a stencil. Other products not manufactured with this superior grade of polyethylene plastic will not give you the same lasting service as ours. Polyethylene plastic is made for easy maintenance. The non-porous, slick surface allows the dried paint build-up to simply flake off after drying when properly taken care of. Stencils are best stored flat and in moderate temperature when not in use. *All of our stencils are designed around D.O.T. specifications whenever applicable.

1/16” (.060 mil.) thick

sku# SS0310D

$60.79 Add to cart
Work Zone 18
STOP SLOW 72″ HANDLE ONLY

STOP SLOW PADDLE 72″ HANDLE ONLY

NCI SKU: SS1040

USE WITH SS1045 STOP SLOW PADDLE

$15.11 Add to cart
Work Zone 24
STOP SLOW PADDLE 24″ with 12″ handle

SIGN STOP SLOW PADDLE HIGH INTENSITY REFLECTIVE BOTH SIDES Handle Length: 12″; Staff Length: No Staff

NCI SKU: SS1045

Use with SS1040 72″ HANDLE

$67.12 Add to cart
Stripe Inverted Tip Marker
Stripe Inverted Tip Marker
  • A fast drying permanent marking paint applied in an inverted position
  • Produces vivid lines
  • Safe on grass and long lasting
  • This non-clogging formulation will not wash away
  • Comes with Seymour’s patented tear away spray-thru cap
$3.95$4.45 Select options
Stripe Solvent Base Extra Traffic Marker
Stripe Solvent Base Extra Traffic Marker

Specifically formulated for line striping over new or freshly coated asphalt

Makes 2-inch to 4-inch wide stripes that are traffic ready in 60 minutes

Good hide with one application

One can will stripe approximately 250 linear feet

VOC Compliant solvent base paint

NCI SKU: WP8610

 

$7.79 Add to cart
Stripe Temporary Inverted Tip Marker
Stripe Temporary Inverted Tip Marker

This quick drying marking paint lasts until it is subjected to moisture

Marks wash away after a few heavy rains or with a garden hose

Comes with Seymour’s patented tear away cap

VOC Compliant solvent base paint

Compatible with the Seymour Z-605 Stripe Gun and the Seymour Z-606 Stripe Wand (not included)

Color: Orange Fluorescent

$6.22 Add to cart
Stripe Traffic Marking Machine
Stripe Traffic Marking Machine

Easy to use machine applies crisp, even 2 in. -4 in. lines on any hard surface.

Designed exclusively for Stripe Traffic paints,

Holds 12 cans

Replacement parts available

NCI SKU: EM1032

 

 

$196.16 Add to cart
Stripe Wand
Stripe Wand

For use with a variety of Seymour stripe inverted tip marking paints (those with a straight tip). This lightweight tool is ideal for a wide range of precise marking applications. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.

  • As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment.
  • This means fulfilling our legal and social responsibilities within the community.
  • Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers.
  • Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.

NCI SKU: EM1034

$46.55 Add to cart
Stripe Water Base Traffic Marker
Stripe Water Base Traffic Marker

Makes stripes 2″ to 4″ wide with our Stripe Z-604 traffic machine.

The universal spray head also works in competitive marking machines.

For marking stencils or curbs, it can be actuated by hand or with the Stripe Z-608 traffic marking wand.

Use for parking lots, warehouses, tennis courts, playgrounds, landing strips, basketball courts, etc.

Dries to touch in 15 minutes.

Color: Yellow

NCI SKU: WP8600

 

$5.99 Add to cart
Strobe Bulbs
Strobe Bulbs

NCI SKU: GL1801B

$21.07 Add to cart
Strobe Lights 625 Series
Strobe Lights 625 Series

The 625 lights are a bright, powerful, economical, line of multi-voltage quad flash and double flash strobe lights. The Q625 features 75 quad FPM for an exceptional attention getting display. The DFS625 has the same housing with 75 double FPM and is also available in 120V AC. The 625 series comes standard with a black ABS plastic base and fresnel lens. The 625 lights have an optional flange mount base and/or 6″ tall dome for greater light output and a higher profile. The 625P strobe lights include a 1/2″ pipe mount plate added to the base of the light. Magnet mount versions include a 75 lb. pull magnet and a 15′ coiled cord & cigarette lighter plug with a built in ON/OFF switch.

  • Amber/Clear
$206.45 Add to cart
Tire Ring Base
Tire Ring Base

27lb tire ring base. Used as an external ballast for Channelizer drums. Made from 100% recycled product.

BASE ONLY.

$8.00 Add to cart
Tma 9181
Tma 9181

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.

The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

SKU#: NCI SKU#: Info:
3526081-0000 GT6236 Cartridge A
3526082-0000 GT6237 Cartridge B
$5,398.40$5,688.48 Select options
Tma Cart. Assy.
Tma Cart. Assy.

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.

The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

SKU#: NCI SKU#: Info:
3524803-0000 GT6220 Aux-1
3524805-0000 GT6225 Aux-2
$637.39$6,287.68 Select options
Tma Hydraulic Pump Assembly
Tma Hydraulic Pump Assembly

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

NCI SKU: GT6248

$2,385.60 Add to cart
Tma Release Cable Assembly
Tma Release Cable Assembly

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

NCI SKU: GT6239

$384.78 Add to cart
Tma Safe-Stop Shear Bolt
Tma Safe-Stop Shear Bolt

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

NCI SKU: GT6250

$9.35 Add to cart
Tma Socket Receiver Under
Tma Socket Receiver Under

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

NCI SKU: GT6205

$227.08 Add to cart
Tma Sst Safe Stop Trailer
Tma Sst Safe Stop Trailer

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

NCI SKU: GT6234

$25,400.52 Add to cart
Tma Support Mount
Tma Support Mount

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

NCI SKU: GT6202R

$576.63 Add to cart
Tma Support Mount Left
Tma Support Mount Left

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

NCI SKU: GT6202L

$576.63 Add to cart
Tma Vorteq Trailer
Tma Vorteq Trailer

The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.

GT6232 NCI SKU: GT6232

$14,717.00 Add to cart
Traffic Paint
Traffic Paint

Options

Sku# NCI Sku# Description
L9-450 WP2180 White Latex
L9-451 WP2190 Yellow Latex
L9-454 WP2175 Blue Latex
L9-459 WP2185 Black Latex
S9-450 WP2195 White Alkyd
S9-451 WP2205 Yellow Alkyd
S9-459 WP2200 Black Alkyd
$31.23$42.40 Select options
Traffic Safety Warning 3 Piece Emergency Triangle Kit
Traffic Safety Warning 3 Piece Emergency Triangle Kit

Mutual emergency triangle kits is manufactured with an outer border of red high-intensity retro-reflective plastic and an orange fluorescent plastic inner triangle. Supplied in sets of 3 with compact case for storage. Meets or exceeds Federal Specification FMVSS-125.

  • Emergency triangle kits are manufactured with an outer border of red high-intensity retro-reflective plastic
  • An orange fluorescent plastic inner triangle
  • Supplied in sets of 3 with compact case for storage
  • Meets or exceeds federal specification FMVSS-125

NCI SKU: GF2210

$29.92 Add to cart
Triton Barrier
Triton Barrier

The Triton Barrier® TL-3 System provides an improved and more permanent method for upgrading existing Triton Barriers to NCHRP 350, Test Level 3. The Triton TL-3 allows users to “forget the kit,” and features a new pedestal system that uses only a screwdriver and steel strap to easily attach to the existing barrier. After stacking the Triton Barrier on top of two new TL-3 pedestals, a

mild strength steel band straps each pedestal to the barrier, creating a single, more permanent unit. Once assembled, the Triton TL-3 creates positive, crashworthy protection up to 100 km/h (62 mph) that will help to prevent penetration into work areas. With the new easy-to attach pedestals, Triton Barrier’s center of gravity automatically adjusts to provide high- speed, NCHRP 350, TL-3 performance. As a portable barrier, the Triton TL-3 transports easily from site to site for fast deployment without the use of cranes or heavy equipment.

SKU#: NCI SKU#: Info:
3595020-0000 GB2150 Assy 6.5’Wh.
3595020-0100 GB2151 Assy 6.5’Or.
3595351-0000 GB2155 Tl3 Kit(2Kit)
$136.19$869.72 Select options
Turnpike Grade Curb Delineator
Turnpike Grade Curb Delineator

38″ WHITE ISG.

 

NCI SKU: GF3105

$102.56 Add to cart
Turnpike Grade Curb Delineator
Turnpike Grade Curb Delineator

38″ Yellow ISG.

 

NCI SKU: GF3100

$102.56 Add to cart