View cart “Quadguard Anchor 18″ Rod” has been added to your cart.
BARR TYPE-I W/FLSHR FS A 6 VOLT RENTAL
BARR TYPE-I W/FLSHR FS A 6 VOLT RENTAL
  • Type I barricade with spec “”A”” flasher light with 8″”x 24″” Eng. grade sheeting?right stripe on one side and left on the other. Units comply with NCHRP350 for channelizing devices.
  • Minimum 100 unit day billing applies

 

SKU# NCI SKU#
VB1180
VB1290

Call For Quote

Read more
BARRICADE SAW HORSE 6' W/LEGS RENTAL
BARRICADE SAW HORSE 6′ W/LEGS RENTAL
  • This plastic unit is designed to break apart on impact. It has Hi-Intensity Prismatic Sheeting. Units comply with NCHRP350 for channelizing devices.
  • 30 day minimum rental

 

NCI SKU: VB1550R

Call for price Read more
BARRICADE TYPE III
BARRICADE TYPE III

T3B™ Plastic Barricade Products are the perfect answer to the problem of how to comply with the requirements of Federal Report # NCHRP 350. Our barricade parts are lightweight; a six-foot X-Tube upright weighs only a little over 3 pounds, an eight-foot 1″ x 8″ T3B panel weighs only 5 pounds. The entire upright assembly for an 8-foot Type III T3B barricade weighs only 22 pounds!

SKU Description
GB6295NHI Barricade Type III 4' HiI
GB6395NHI Barricade Type III 6' HiI
GB6495NHI Barricade Type III 8' HiI
$155.31$201.11 Select options
BARRICADE TYPE III 6' RENTAL
BARRICADE TYPE III 6′ RENTAL
  • This plastic unit is designed to break apart on impact. It has Hi-Intensity Prismatic Sheeting. Units comply with NCHRP350 for channelizing devices.
  • 30 day minimum rental

 

NCI SKU: VB1400

Call for price Read more
BARRICADE TYPE III ONLY 8' RENTAL
BARRICADE TYPE III ONLY 8′ RENTAL
  • This plastic unit is designed to break apart on impact. It has Hi-Intensity Prismatic Sheeting. Units comply with NCHRP350 for channelizing devices.
  • 30 day minimum rental

 

NCI SKU: VB1305

Call for price Read more
BARRICADE TYPE-I ONLY RENTAL
BARRICADE TYPE-I ONLY RENTAL
  • Type I barricade only with 8″”x 24″” Eng. grade sheeting right stripe on one side and left on the other. Units comply with NCHRP350 for channelizing devices.
  • Minimum 100 unit day billing applies

 

NCI SKU: VB1170

Call for price Read more
BARRICADE TYPE-I REFLECTIVE ORANGE/WHITE
BARRICADE TYPE-I REFLECTIVE ORANGE/WHITE

Type I Barricade with wood panels and 12 gauge galvanized steel legs. Top panel 8″x24″ with Engineer Grade Reflective sheeting. Bottom panel 6″x24″ painted white. Top panels are striped to the left and right on opposite sides.

 

$49.30 Add to cart
BARRICADE TYPE-I W/SB FED SPEC C RENTAL
BARRICADE TYPE-I W/SB FED SPEC C RENTAL
  • Type I barricade with spec “”C”” steadyburn light with 8″”x 24″” Eng. grade sheeting?right stripe on one side and left on the other. Units comply with NCHRP350 for channelizing devices.
  • Minimum 100 unit day billing applies

 

NCI SKU: VB1190

Call for price Read more
BARRICADE TYPE-II ONLY RENTAL
BARRICADE TYPE-II ONLY RENTAL
  • Type I barricade only with 8″”x 24″” Eng. grade sheeting?right stripe on one side and left on the other. Units comply with NCHRP350 for channelizing devices.
  • Minimum 100 unit day billing applies.

 

NCI SKU: VB1270

Call for price Read more
BARRICADE TYPE-II REFLECTIVE ORANGE/WHITE
BARRICADE TYPE-II REFLECTIVE ORANGE/WHITE

Type II Barricade with wood panels and 12 gauge galvanized steel legs. Top and bottom panels are 8″x24″ with Engineer Grade Reflective sheeting. Panels are striped to the left and right on opposite sides.

$57.80 Add to cart
BARRICADE TYPE-III ONLY 4' RENTAL
BARRICADE TYPE-III ONLY 4′ RENTAL
  • This plastic unit is designed to break apart on impact. It has Hi-Intensity Prismatic Sheeting. Units comply with NCHRP350 for channelizing devices.
  • 30 day minimum rental.

 

NCI SKU: VB1300

Call for price Read more
Barrier “Core Only”
Barrier “Core Only”

The BarrierGate is a crashworthy, automated gate for barrier openings that allows you to restrict unauthorized access, eliminate dangerous barrier ends, and save lives. This system provides benefits to all who use the roadway system:
– Prevents illegal U-turns that cause serious accidents
– Provides convenient access to authorized personnel
– Improves emergency response times
– Increases maintenance productivity
– Ideal for rerouting traffic

NCI SKU: GB0700C

$47.25 Add to cart
Energite III Crash Cushion System - Lid Only
Barrier Inertial 1400

The Energite III is a non-redirective, easy to install crash cushion consisting of a number of sand filled polyethylene plastic modules that are installed in a specific geometric arrangement array in front of a hazard. Each module in the array consists of a one piece barrel, a lid, and in some modules, a cone insert. The cone insert is used to adjust the height or center of mass and the overall weight of the barrel.The barrel’s weight requirement is determined by its place within the array.

SKU GB1400

$199.95 Add to cart
Barrier Inertial 2100
Barrier Inertial 2100

The Energite III is a non-redirective, easy to install crash cushion consisting of a number of sand filled polyethylene plastic modules that are installed in a specific geometric arrangement array in front of a hazard. Each module in the array consists of a one piece barrel, a lid, and in some modules, a cone insert. The cone insert is used to adjust the height or center of mass and the overall weight of the barrel.The barrel’s weight requirement is determined by its place within the array.

NCI SKU: GB2100

$199.95 Add to cart
Barrier Inertial 400 sand filled plastic barrel (SFPB)
Barrier Inertial 400 sand filled plastic barrel (SFPB)

The Energite III is a non-redirective, easy to install crash cushion consisting of a number of sand filled polyethylene plastic modules that are installed in a specific geometric arrangement array in front of a hazard. Each module in the array consists of a one piece barrel, a lid, and in some modules, a cone insert. The cone insert is used to adjust the height or center of mass and the overall weight of the barrel.The barrel’s weight requirement is determined by its place within the array.

NCI SKU: GB0400

$199.95 Add to cart
Barrier Inertial 700
Barrier Inertial 700

The Energite III is a non-redirective, easy to install crash cushion consisting of a number of sand filled polyethylene plastic modules that are installed in a specific geometric arrangement array in front of a hazard. Each module in the array consists of a one piece barrel, a lid, and in some modules, a cone insert. The cone insert is used to adjust the height or center of mass and the overall weight of the barrel.The barrel’s weight requirement is determined by its place within the array.

NCI SKU: GB0700

$199.95 Add to cart
Cartridge assembly for SS90HD TMA
Cartridge assembly for SS90HD TMA

The SS90HD is a heavy duty, potentially reusable truck mounted attenuator (TMA) available for use on stationary or moving shadow/support vehicles. This TMA has passed all mandatory and optional testing and is NCHRP Report 350 Test Level 3 compliant. Additionally, the SS90HD has passed the UK TD 49, 110 km/h (68 mph) test.The unit is comprised of two light-weight aluminum cartridges contained in a potentially reusable galvanized support frame. The SS90HD helps to absorb rear-end impacts at speeds up to 62 mph (100 km/h) when impacted according to NCHRP350 crash test standards.

 

Specifications

– 13’2” (3.98m) length from back of truck

– 93” (2.36m) wide – 1996 lbs (906 kg)

– 12” (3055 mm) road clearance

– 16,090 lbs (7300 kg) minimum support vehicle weight

$4,805.92$5,297.60 Select options
i-Flex Guard Rail Reflector
i-Flex Guard Rail Reflector

12 W-1 AR 3×4.

 

NCI SKU: GR1673

$3.68 Add to cart
i-Flex Guard Rail Reflector
i-Flex Guard Rail Reflector

The IBM allows you to protect your investment in guardrail with significantly reduced installation costs. IBMs fit over all steel I-Beam guardrail posts and are available with a choice of reflective sheeting which may be applied to one or both sides. 12 YLW 1 WAY 3X4.

 

NCI SKU: GR1672

$3.68 Add to cart
LIGHT SOLAR 360 RED STAKE MT DUAL FUNC.
LIGHT SOLAR 360 RED STAKE MT DUAL FUNC.

Flash Rate: 60+/- Times/Minute
Power: .4 watt solar panel
Energy: 2.4 volt 1600 mAh
Illumination: 2 High Intensity LED’s
Effective Intensity: 6 Candela
Panel Cover Material: Polycarbonate
Stake Material: ABS
Lens Diameter: 4 inches
Total Height: 9 inches
Lens Height: 5 inches
Stake Height: 4 inches
6 Hour Sun Charge: 120 hrs. dusk to dawn (Flash Mode)
6 Hour Sun Charge: 72 hrs. dusk to dawn (Steady Mode)
On/Off Switch: Automatic on dusk, off dawn
Security: Security Bolt Tool Included
Vandalism: Replaceable solar panel shield

Color: Red

NCI SKU: GL1335

$51.25 Add to cart
Plastic Concrete Barrier Mount Reflector
Plastic Concrete Barrier Mount Reflector

3″ X 4″, 12-Y1 , Yellow

 

NCI SKU: GR1667

$2.88 Add to cart
Quadguard Anchor 18" Rod
Quadguard Anchor 18″ Rod

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3027

$16.35 Add to cart
Quadguard Anchor Mp-3 Quart
Quadguard Anchor Adhesive

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3026

$56.62 Add to cart
Quadguard Bolt
Quadguard Bolt

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3081

$3.98 Add to cart
Quadguard Cart.
Quadguard Cart.

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

SKU#: NCI SKU#: Imfo:
3540010-0000 GQ3047 Type I
3540020-0000 GQ3050 Type II
$697.42$733.21 Select options
Quadguard Anchor Kit Mp-3
Quadguard Concrete Anchor Kit

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3025

$112.62 Add to cart
Quadguard Diaphragm
Quadguard Diaphragm

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

SKU#: NCI SKU#: Info:
3540010-0000 GQ3052 Assy,24″
3540072-0000 GQ3053 Assy,30″
3540073-0000 GQ3054 Assy,36″
$882.17$1,044.96 Select options
Quadguard Fender Panel
Quadguard Fender Panel

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3055

$603.90 Add to cart
Quadguard Flat Washer
Quadguard Flat Washer

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3029

$2.35 Add to cart
Quadguard Hex Nut
Quadguard Hex Nut

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3028

$3.64 Add to cart
Quadguard II
Quadguard II

LESS is MORE!

QuadGuard II has up to 25% less footprint

reducing installation cost

Steel Nose provides excellent visibly

Majority of system is identical to QuadGuard reduced inventory requirements

Shorter Systems are less likely to be impacted

Offers hazard protection from 40 km/h (25mph)to 115 km/h to (70mph)

QUADGUARD®II CRASH CUSHION family has evolved again! Using the existing framework of the QuadGuard, the QuadGuard II provides TL-2 and TL-3 protection using less length.

The TL-2 QuadGuard II is 25% shorter than the original QuadGuard measuring less than 3m (10’). The TL-3 model is also nearly a meter, 3 feet, shorter than its predecessor.

The only modifications are the addition of the revolutionary Steel Nose, and the monorail Guide Stabilizers. The remaining components are identical to the existing NCHRP 350 systems that have been installed globally since the mid 1990’s.

The QuadGuard II will telescope rearward on head-on impacts by both the light car and the high center-of-gravity pickup truck at speeds up to 100 km/h (62 mph) and safely redirect errant vehicles on impact up to 20 angles into the side of the unit without gating.

Download GQ4600 QuadGuard II product data sheet

SKU#: NCI SKU#: Info:
QG210024 GQ4605 24″ Tl-3 Unassembled
QG27024 GQ4600 24″ Tl-2 Unassembled
$9,210.00$16,771.00 Select options
Quadguard Ii Shim Kit
Quadguard Ii Shim Kit

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3056

$58.91 Add to cart
Quadguard Left Transition
Quadguard Left Transition

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3637L

$794.19 Add to cart
Quadguard Lifting Bracket
Quadguard Lifting Bracket

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3030

$27.33 Add to cart
Quadguard Monorail
Quadguard Monorail

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3076

$474.54 Add to cart
Quadguard Monorail
Quadguard Monorail

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3078

$1,245.44 Add to cart
Quadguard Monorail End Cap
Quadguard Monorail End Cap

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3080

$81.87 Add to cart
Quadguard Nose Yellow
Quadguard Nose Yellow

The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.

Download Quad Guard Manual

NCI SKU: GQ3065

$640.86 Add to cart