The O-Torque Beamer, which is made from aluminum, stainless steel, and chrome-plated steel components, is suitable for both horizontal and vertical installations onto steel I and H beams, making it both a supremely versatile and durable anchorage connector. It is compatible with beams with widths ranging from 4–1/2″ – 12″, and flange thicknesses ranging from 1/2″ – 2″, and may be used in either fall arrest or fall restraint applications. Incredibly simple to install, the O-Torque Beamer can easily be moved between installation locations.
5K Concrete Anchorage Connector
The Guardian Fall Protection 5K Concrete Anchorage Connector is designed for use in 12 inch thick cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 5K Concrete Anchorage Connector fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.
Seraph Construction Harness
The Guardian Fall Protection Seraph Construction Harness is specially designed with six points of adjustment, dorsal and side D-rings, and improved elasticity in the shoulder and back for added comfort. It includes an integrated impact indicator that clearly identifies if it has been exposed to forces of a fall, lanyard keepers, and is easy to adjust.
Velocity Harness with Side D-rings
The Guardian Fall Protection Velocity Harness is the best available economy harnesses on the market. One of our most popular harness models, the Velocity offers dual lanyard keepers that reduce the risk of excess webbing getting in the way during work, as well as a customizable patch that allows workers to record information on harnesses without jeopardizing webbing integrity. The Velocity is designed to present a clean, professional look on the job. It incorporates a red webbing core to provide an easily recognizable indicator of damage, and is supremely durable and lightweight. Includes back and side D-rings.
Bucket Of Safe-Tie
The Guardian Fall Protection Bucket of Safe-Tie is a roofing kit built for the roofer, by the roofer. It is one of the few kits available on the market that includes a lifeline with an integrated shock absorber, which allows the worker to never have to worry about incorporating an additional shock absorbing lanyard into their fall protection system. Removing the shock absorbing component from the worker
Lifeline Poly Steel Rope 50′ With Snap Hook End
The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick.
The Guardian Fall Protection Velocity Harness is one of the best available economy harnesses on the market. Revamped from older, basic designs, the Velocity is one of our most popular models. It offers dual lanyard keepers that reduce the risk of excess webbing getting in the way during work, as well as a customizable patch that allows workers to customize harnesses without jeopardizing webbing integrity. The Velocity is designed to present a clean, professional look on the job. It incorporates a red webbing core to provide an easily recognizable indicator of damage, and is supremely durable and lightweight.
Edge Series 20′ SRL
The Guardian Fall Protection Edge Series 20′ cable Self Retracting Lifeline w/ snap hook. Its durable aluminum housing, high strength composite cable guide, and non-corrosive components all make this SRL supremely compact and lightweight. It incorporates a quick-action breaking system, and meets or exceeds all OSHA and ANSI standards.
Edge Angel 30′ SRL
The Guardian Fall Protection Edge Angel SRL is designed specifically for Leading Edge work. It includes an integrated shock absorbing component that helps refocus forces away from the portion of the cable that comes into contact with the edge. While the ideal position for any attachment point is overhead, Leading Edge retractables play an important role in the construction industry because, frequently, the only viable attachment point is at foot level. Most SRLs on the marketplace are not certified for such applications, but the Heavy Duty Edge is no common SRL, and holds up against even the toughest use.