Falcon Safety Super Sound Horn
Falcon Safety Super Sound Horn

The Mini horn with the Maximum sound. Just a touch of your thumb produces a piercing blast that can be heard up to half -mile over land and a mile over water. Palm-size convenience with unlimited uses from casual small craft signaling to personal protection. 100% ozone-safe-non-flammable. Compact- only 4-1/2? tall. Stainless steel, non-corrosive diaphragm. Guaranteed unbreakable. Meets U.S. Coast Guard recommendations for boats up to 39 (12 meters). Refills readily available. No need to worry about batteries.

  • 100% ozone safe
  • Non-flammable
  • Compact – only 4-1/2″ tall
  • Stainless steel, non-corrosive diaphragm
$18.02$44.88 Select options
Fat Boy Heavy Duty Aluminum Framing Square
Fat Boy Heavy Duty Aluminum Framing Square
  • Made of 3/16-inch thick heavy gauge aluminum, includes 1/8, 1/10, 1/16 and 1/32-inch graduations
  • 50 percent thicker than standard squares and resists bending
  • Aluminum construction will not rust or corrode
  • Deep stamped graduations, number and rafter tables are deep stamped for long life
  • Made in USA
  • $15.89 Add to cart
    Fence T Post 72″
    Fence T Post 72″

    Made from High-Strength Rail Steel and coated with high quality green enamel paint to last years longer than other posts in the field. The weight of each post is 1.25lbs/ft. Studs are spaced uniformly along the length of the “T” shaped post.

    NCI SKU: EP2772

    $8.18 Add to cart
    FG 300 PIN TOOL

    NCI SKU: GF3107

    $23.00 Add to cart
    FG 328 PE
    FG 328 PE

    NCI SKU: GF3114

    $14.90 Add to cart
    Fg 336 Efx
    Fg 336 Efx

    36″ Post Org. W/2-3″ Ar

     

    NCI SKU: GF3127

    $50.26 Add to cart
    Fiber-Reinforced Rubber Wheel Chock
    Fiber-Reinforced Rubber Wheel Chock
    • Wheel chocks are molded from a tough fiber-reinforced rubber compound
    • Well suited for tractor trailers and other heavy equipment
    • Available in black color
    • Measures 8-inches length by 6-inches width by 9-inches height

     

    NCI SKU: GC1369

    $25.10 Add to cart
    Fibre Expansion Joint
    Fibre Expansion Joint

    FIBRE EXPANSION JOINT is composed of cellular fibers securely bonded together and uniformly saturated with asphalt to assure longevity. Wherever a cost-effective joint filler is required, FIBRE EXPANSION JOINT meets the need. Manufactured and marketed by W. R. MEADOWS since the early 1930s, FIBRE EXPANSION JOINT is backed by over 80 years of proven application experience.

    FIBRE EXPANSION JOINT is versatile, resilient, flexible and non-extruding. When compressed to half of its original thickness, it will recover to a minimum of 70% of its original thickness. FIBRE EXPANSION JOINT will not deform, twist, or break with normal on-the-job handling. Breakage, waste and functional failure resulting from the use of inferior, foreign fiber materials can cost you time and dollars and can result in a substandard finished job, generating costly callbacks and rework expenses. However, the purchase and installation of FIBRE EXPANSION JOINT (a small segment of the total project’s cost) contributes to both the final cost efficiency and functional success, far greater in proportion than its original cost.

    • Provides the ideal product for the majority of all expansion/contraction joint requirements.
    • Non-extruding … versatile … offers a minimum 70% recovery after compression.
    • This tough, lightweight, easy-to-use, semi-rigid joint filler is available in strips and shapes fabricated to your requirements.
    • Easy to cut … dimensionally stable … not sticky in summer or brittle in winter.
    • Provides neat, finished joints requiring no trimming.
    • Often copied … but never equaled.
    • Remains the standard of the industry today … with over 80 years of proven and satisfactory performance.
    • Can be punched for dowel bars and laminated to thicknesses greater than 1? (25.4 mm)
    $3.40$67.93 Select options
    Filter Bag Fabric
    Filter Bag Fabric
    SKU#: NCI SKU#: Info:
    204109-1 AF0902 4’X6′ 10Oz W/Spout
    204109-2 AF0905N 15’X15′ 10Oz W/Spout
    $63.00$208.18 Select options
    Flag Holder Sign

    Included on ALL X-Stand Series Masts; Displays up to 3 flags (sold separately see GF2100 and GF2125)

    $7.20 Add to cart
    Flagging Tape
    Flagging Tape
    • Typically used in construction environments for surveying, mapping, and roping off an area.
    • Non adhesive PVC carrier ensures no residue left behind.
    $1.88 Select options
    Flasher/Steady Burn Lt.(Amb)
    Flasher/Steady Burn Lt.(Amb)

    Features

    • Made in the USA!
    • Meets MUTCD requirements
    • ITE certified
    • Ambient photocell with a timed delay that reacts to light in the environment
    • Operates on 4 easy to install D-cell batteries
    • Compact base with battery contacts that work with gravity for greater conductivity
    • L.E.D. encased in high impact plastic
    • 90 degree angle lens offers increased visibility
    • 3 Way switching options: Steady Burn, Flashing, and Off

    NCI SKU: GF2218

    $17.05 Add to cart
    Flat Wire Texture Broom
    Flat Wire Texture Broom
  • Broom produces a uniform rough groove surface on roads and bridges for max traction
  • Bracket accepts all clevis handles
  • $151.04 Add to cart
    Flexible Vibrator Shaft with Quick Disconnect Coupler
    Flexible Vibrator Shaft with Quick Disconnect Coupler

    Oztec Concrete Vibrator 21′ FS 21 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec power units, are reversible (doubling their service life), and come supplied with “quick change” adapters

    $130.32$300.96 Select options
    FLOAT BULL MAGNw/BRACK
    FLOAT BULL MAGNw/BRACK

    CC801-01 Float blade is “broken-in”, curved and balanced to prevent digging.

    • Accepts 4 Hole Bracket Square Ends Bullfloat
    • Made of Magnesium, lightweight and longer lasting than aluminum alloy
    • Float blade is “broken-in”, curved and balanced to prevent digging

     

    NCI SKU: EF1165

    $109.23 Add to cart
    FLOAT BULL MAGNw/BRACK
    FLOAT BULL MAGNw/BRACK

    48-Inch x 8-Inch RE Mag Bull Float without Brkt.

    • Genuine Extru-Lite Magnesium
    • Lightweight and longer lasting than aluminum alloy
    • Float blade is ‘broken-in,’ curved and balanced to prevent digging

     

    NCI SKU: EF1170

    $117.51 Add to cart
    Floor Industrial Squeege
    Floor Industrial Squeege

    Floor squeegee that features a high performance gray EPDM rubber blade that resists marking floors. The blade exhibits excellent chemical resistance and high and low temperature properties. This is one of Haviland

    14 gauge red powdered-coated frame
    1/4” x 2” EPDM rubber compound resistant to most animal and vegetable products and by-products
    A hard gray rubber blade is available
    Engineered for superior push/pull performance
    All steel frame with rounded corners for protection and safety in shipping
    Straight frames are equipped with a built in scraper
    Socket accepts a standard 1 1/8″ tapered handle
    T-66, CE-100, and PCT-97 sockets are also available
    The refill blade is the 1900 Line

    NCI SKU: ES2625

    $16.27 Add to cart
    Footguard #200 Replacement Strap
    Footguard #200 with Rubber Strap

    Whatever your industry, whatever the hazards to your workers’ knees, shins, insteps, feet, or toes, Ellwood Safety has the protection you need.

    Ellwood Safety’s Sankey Foot Guards, to begin with, the foot guards are metal shields worn over shoes for maximum protection to the entire foot – instep as well as toes – against falling, rolling, or flying objects or accidental tool blows. They are designed to withstand an impact of 75 foot pounds, with a large safety factor designed in.

    Foot guards fit any shoe (no rights or lefts), with 5″ widths. They are light enough to be worn comfortably all day. To keep the guard properly positioned, it has a rubber toe clip, crossbar, and a one-piece rubber strap with a tension buckle.

    FOOT GUARD WITH RUBBER TOE

    No. 200 – Aluminum alloy, aircraft quality (.081″) 2lb. /pair

    NCI SKU: GF2250

    $4.47$43.88 Select options
    Formkote OTC
    Formkote OTC
  • 55 gal. drum
  • 5 gal. pail
  • $50.95$466.40 Select options
    Full Brim Safari Hat - Yellow/Lime - Large/XL
    Full Brim Safari Hat – Yellow/Lime – Large/XL
    • 100% polyester material
    • Mesh around the crown of the head keeps you cool and ventilated
    • 1″” wide silver reflective material with 2″” contrasting color stripes 360 degrees around the hat
    • Dark grey under brim reduces glare
    • Silver reflective piping around brim and top of hat
    • Drawstring keeps the hat securely on your head
    • ANSI/ISEA 107 headwear compliant

     

    NCI SKU: GH1600L

    $10.88 Add to cart
    Full Zip Hoodie Sweatshirt with Slash Pockets, Lime
    Full Zip Hoodie Sweatshirt with Slash Pockets, Lime

    ML Kishigo full zip hoodie sweatshirt. Black lower body and sleeves help the wearer keep a clean appearance. High quality 9 oz sweatshirt material. Black rib knit cuffing. 2-inches Wide VizLite reflective materials. Rugged stitching. Lower outside slash pockets. ANSI/ISEA Class 3 compliant.

    • Black lower body and sleeves help the wearer keep a clean appearance
    • High quality 9 oz sweatshirt material
    • Black rib knit cuffing
    • 2-inches Wide VizLite reflective materials

     

    SKU# NCI SKU# Size
    JS102-LG NCI SKU: GS1760L LG
    JS102-XL NCI SKU: GS1760L XL
    JS102-2XL NCI SKU: GS1760L 2XL
    JS102-3XL NCI SKU: GS1760L 3XL
    $35.25 Select options
    Gatorade Instant Powder Mix
    Gatorade Instant Powder Mix

    8.5oz package makes 1 gal when mixed

    $2.53 Select options
    Glass Beads
    Glass Beads

    Recent tests confirm that Ennis-Flint High Performance Glass Beads don’t just comply to AS/NZS 2009, but that they significantly exceed the test criteria on several key indicators. Many applicators using Ennis-Flint High Performance Glass Beads are also reporting significantly enhanced retroreflectivity levels compared to other products. APAS approved; Ennis-Flint High Performance Glass Beads are certified by APAS to Specification 0042. Colour: Ennis-Flint High Performance Glass Beads have been found to be lighter in colour than the standard.

    $37.50 Add to cart
    GLOVE CLEAN-GRIP
    GLOVE CLEAN-GRIP

    Natural white string knit

    PVC dots on both sides

    Knit wrist

    Seamless knit palm with PVC dots

    Applications: manufacturing, general labor, material handling, shipping/receiving, agriculture

    NCI SKU: GG1060

    $8.48 Add to cart
    GLOVE DRIVER LEATHER LINED LG.
    GLOVE DRIVER LEATHER LINED LG.

    Premium grain pigskin leather hi-visibility driver gloves with 100 gram Thinsulate lining. Shirred elastic wrist for a snug fit and helps keep dirt and debris out of the glove. Hi-visibility orange nylon back with lime green accents. 3M Scotchlite reflective silver fabric on back of fingertips and across knuckles. Keystone thumb construction. ANSI/ISEA 107-1999 Level 2. 3M Scotchlite reflective silver fabric on back of fingertips and across knuckles. ANSI/ISEA 107-1999 Level 2. Fluorescent orange polyester back.

    3M Scotchlite reflective silver fabric on back of fingertips and across knuckles

    ANSI/ISEA 107-1999 Level 2

    Fluorescent orange polyester back

    NCI SKU: GG1080

    $10.08 Add to cart
    GLOVE DRIVERS COWHIDE
    GLOVE DRIVERS COWHIDE

    1 pair West Chester Large Gray Premium Grain Cowhide Kevlar Driver Gloves With Keystone Thumb, Shirred Elastic Cuff And Cotton Colored Hem WECKS990K/L. This is a Brand New item.

    Premium grain cowhide leather driver glove with 100% Kevlar lining. Keystone thumb is durable and allows for the best flexibility. Shirred elastic wrist helps keep dirt and debris from entering the glove. Cotton hem color coded for easy size identify

    NCI SKU: GG1070

    $7.81 Add to cart