Shop
Showing 841–880 of 974 results

Square Point Shovel with Poly D-grip
This Union Tools square point shovel has so many uses that it’s an essential part of any tool assortment. It’s perfect for moving loose garden material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.

Square Point Shovel with Tab Socket and Rolled Step, Wood Handle
Strength and durability make Razor-Back tools the choice of professionals. This sturdy square point shovel is an essential part of any tool assortment. It’s perfect for moving loose ground material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.

Square Point Shovel with Tab Socket and Rolled Step, Wood Handle and D-Grip
Strength and durability make Razor-Back tools the choice of professionals. This sturdy square point shovel is an essential part of any tool assortment. It’s perfect for moving loose garden material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.

Square Post Street Name Sign Brackets

Square Scrub Brush
- 8″ x 2-1/2″ wood block works in hand or
with a handle - Select cream-colored crimped plastic fill for
general cleaning, or tampico fill for
scrubbing with acid and lime removers

Square Sign Post
- Compatible with all existing square posts
- Mating tube sections allow for fast, safe, ground-level installations
- Ground anchor posts allow for rapid replacement installations when necessary
- Square tube sections provide superior resistance to wind and other forces over U- channel or round posts
- The Ulti-Mate Sign Support System provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware
- FHWA approved as meeting safety requirements for sign supports

Square-Shank Keystone-Tip Bull Driver Screwdriver, 5/16-Inch by 8-Inch
Klein BD308 5/16-Inch by 8-Inch Square-Shank Keystone-Tip Bull Driver Screwdriver. The Klein BD308 5/16-Inch by 8-Inch Square-Shank Keystone-Tip Bull Driver Screwdriver has an oversized handle that is 35-Percent larger than comparable screwdriver handles, which delivers up to 50-Percent extra power to perform tough jobs with minimum effort. The Klein BD308 5/16-Inch by 8-Inch Square-Shank Keystone-Tip Bull Driver Screwdriver features smooth Comfordome handles that fit the palm of the hand comfortably, a chrome-plated shaft that helps prevent corrosion, internal flanges that provides a solid, twist-resistant shaft anchor, a tough amber plastic handle, and nickel-chrome, precision-forged and polished blades with black tips. The Klein BD308 meets or exceeds applicable ASME/ANSI specifications.
- Oversized handle 35-Percent larger
- Delivers up to 50-Percent extra power to perform tough jobs with minimum effort
- Chrome-plated shaft helps prevent corrosionKeystone tip
- Meets or exceeds applicable ASME/ANSI specifications
NCI SKU: ES1525

SQUEEGE V SHAPE PUSH STYLE RV-1
- REVERSIBLE, Push/Pull style
- “V” shaped with a 7” throat
- Uses CSRH-4, 4’ wood handle
NCI SKU: ES2635

SS90 TMA (Truck Mounted Attenuator)
The SS90HD is a heavy duty, potentially reusable truck mounted attenuator (TMA) available for use on stationary or moving shadow/support vehicles. This TMA has passed all mandatory and optional testing and is NCHRP Report 350 Test Level 3 compliant. Additionally, the SS90HD has passed the UK TD 49, 110 km/h (68 mph) test.The unit is comprised of two light-weight aluminum cartridges contained in a potentially reusable galvanized support frame. The SS90HD helps to absorb rear-end impacts at speeds up to 62 mph (100 km/h) when impacted according to NCHRP350 crash test standards.
Specifications
– 13’2” (3.98m) length from back of truck
– 93” (2.36m) wide – 1996 lbs (906 kg)
– 12” (3055 mm) road clearance
– 16,090 lbs (7300 kg) minimum support vehicle weight

Standard Cable Kit for the NS-60
RS-232 Download Cable Connects Your PC to Your NS-60 DMI with Data Output
Invaluable NITESTAR RS-232 Optional Download Cable enables instant data transfer when you use it to connect your PC computer to your NS-60 DMI with Data Output (No. 103461), sold separately.
NCI SKU: GN3400

Standard Fast Dry Waterborne Traffic Marking Paint
A user friendly, high solids, fast drying waterborne traffic paint suitable for application by airless or air atomized equipment. May be used to stripe roadways, airports and parking lots with or without pressure applied glass beads. It offers all of the benefits of a water reducible paint, and quickly dries to a no track condition. Performance and color properties of this paint meets TT-P-1952E Types I & II.

Standard Line Level

Standard Vinyl Highway Safety Traffic Warning Flag
- Ideal for roadside construction signs and for directing traffic
- Open Mesh flags
- Reinforced Vinyl
NCI SKU: GF2125

Steel Concrete Vibrator Head
Oztec HP 150 OZ 1″ x 14″ Vibrator Steel Pencil Head produces the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec’s electric or gasoline powered motors and choice of flexible shafts. The results are exceptional!

Steel Head Concrete Vibrator
- 1-3/4in x 14in Steel Head
- Requires 1.8OZ or Larger Motor

Stencil Handicap Large 39″ Duro
Stencils are produced from the best grade of polyethylene plastic you can use for a stencil. Other products not manufactured with this superior grade of polyethylene plastic will not give you the same lasting service as ours. Polyethylene plastic is made for easy maintenance. The non-porous, slick surface allows the dried paint build-up to simply flake off after drying when properly taken care of. Stencils are best stored flat and in moderate temperature when not in use. *All of our stencils are designed around D.O.T. specifications whenever applicable.
1/16” (.060 mil.) thick
sku# SS0310D

Stens 50:1 2 Cycle Oil
Stens 50:1 2-Cycle Engine Oil Mix / Sold Per Case 2.6 Oz Bottle Pack Size:1 ECHO 6450001, STIHL 0781 319 8008, STIHL 0781 319 8014 J. THOMAS LU-1062, OREGON 54-001 Meets ISO L-EGD, JASO-FD and API TC ratings , Not compatible with greater than 10% ethanol fuel , Do NOT use with E-85 fuel , Color of mix is deep green , Refined to give minimum carbon build-up , Includes fuel stabilizer , Priced per case, sold per case , Order as 1 to receive 24 , Each 2.6 oz. bottle makes 1 gallon of 50:1 mix , 24 bottles per case , Size: 2.6 fl. oz. bottle
NCI SKU: EO1032

Stens Bar And Chain Oil for ECHO 6459006, STIHL 7010 871 0211ECHO 6459006, STIHL 7010 871 0211
Bar And Chain Oil / By The Case 1 Gal Bottles Pack Size:1 ECHO 6459006, STIHL 7010 871 0211 J. THOMAS 10003 For use in all chain saws , 90%-100% 30W , 0.25%-5.0% tackifier , Order as 1 to receive 4 , Formulated with virgin base stocks and a tackiness that reduces sling-off , 4 bottles per case , More lubricants stay on the chain, minimizing friction and wear , Priced per case, sold per case , Size: 1 gallon bottle
NCI SKU: EO1060

STOP SLOW 72″ HANDLE ONLY
STOP SLOW PADDLE 72″ HANDLE ONLY
NCI SKU: SS1040
USE WITH SS1045 STOP SLOW PADDLE

STOP SLOW PADDLE 24″ with 12″ handle
SIGN STOP SLOW PADDLE HIGH INTENSITY REFLECTIVE BOTH SIDES Handle Length: 12″; Staff Length: No Staff
NCI SKU: SS1045
Use with SS1040 72″ HANDLE

Stripe Inverted Tip Marker
- A fast drying permanent marking paint applied in an inverted position
- Produces vivid lines
- Safe on grass and long lasting
- This non-clogging formulation will not wash away
- Comes with Seymour’s patented tear away spray-thru cap

Stripe Solvent Base Extra Traffic Marker
Specifically formulated for line striping over new or freshly coated asphalt
Makes 2-inch to 4-inch wide stripes that are traffic ready in 60 minutes
Good hide with one application
One can will stripe approximately 250 linear feet
VOC Compliant solvent base paint
NCI SKU: WP8610

Stripe Temporary Inverted Tip Marker
This quick drying marking paint lasts until it is subjected to moisture
Marks wash away after a few heavy rains or with a garden hose
Comes with Seymour’s patented tear away cap
VOC Compliant solvent base paint
Compatible with the Seymour Z-605 Stripe Gun and the Seymour Z-606 Stripe Wand (not included)
Color: Orange Fluorescent

Stripe Traffic Marking Machine
Easy to use machine applies crisp, even 2 in. -4 in. lines on any hard surface.
Designed exclusively for Stripe Traffic paints,
Holds 12 cans
Replacement parts available
NCI SKU: EM1032

Stripe Wand
For use with a variety of Seymour stripe inverted tip marking paints (those with a straight tip). This lightweight tool is ideal for a wide range of precise marking applications. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
- As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment.
- This means fulfilling our legal and social responsibilities within the community.
- Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers.
- Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
NCI SKU: EM1034

Stripe Water Base Inverted Tip Marker
A fast drying permanent marking paint applied in an inverted position. Produces vivid lines and is safe on grass. This non-clogging formulation will not wash away. Comes with Seymour

Stripe Water Base Inverted Tip Marker
A fast drying permanent marking paint applied in an inverted position. Produces vivid lines and is safe on grass. This non-clogging formulation will not wash away. Comes with Seymour’s patented tear away spray-thru cap. Lead free colors. Meets APWA color standards. VOC Compliant. May be sprayed by hand or with the Z-605 marking gun or Z-606 marking wand. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.

Stripe Water Base Traffic Marker
Makes stripes 2″ to 4″ wide with our Stripe Z-604 traffic machine.
The universal spray head also works in competitive marking machines.
For marking stencils or curbs, it can be actuated by hand or with the Stripe Z-608 traffic marking wand.
Use for parking lots, warehouses, tennis courts, playgrounds, landing strips, basketball courts, etc.
Dries to touch in 15 minutes.
Color: Yellow
NCI SKU: WP8600

Strobe Lights 625 Series
The 625 lights are a bright, powerful, economical, line of multi-voltage quad flash and double flash strobe lights. The Q625 features 75 quad FPM for an exceptional attention getting display. The DFS625 has the same housing with 75 double FPM and is also available in 120V AC. The 625 series comes standard with a black ABS plastic base and fresnel lens. The 625 lights have an optional flange mount base and/or 6″ tall dome for greater light output and a higher profile. The 625P strobe lights include a 1/2″ pipe mount plate added to the base of the light. Magnet mount versions include a 75 lb. pull magnet and a 15′ coiled cord & cigarette lighter plug with a built in ON/OFF switch.
- Amber/Clear

Sure Plug
SurePlug is a fast setting, non-shrinking, hydraulic
cement compound, formulated to stop leaks in all
types of concrete or masonry surfaces; and is
particularly designed to instantly stop the flow of
running water. SurePlug requires the addition of
only water before plugging and sealing cracks.
Available in three set times of 30 seconds (Fast
Set), 1 minute (Regular Set), and 3 minutes (Slow
Set).
15-Lb. Can

Sure Plug
SurePlug is a fast setting, non-shrinking, hydraulic
cement compound, formulated to stop leaks in all
types of concrete or masonry surfaces; and is
particularly designed to instantly stop the flow of
running water. SurePlug requires the addition of
only water before plugging and sealing cracks.
Available in three set times of 30 seconds (Fast
Set), 1 minute (Regular Set), and 3 minutes (Slow
Set).
50-Lb. Can
NCI SKU: BS1300

Suregrout Plus
SureGrout Plus is a precision made, ready to use, non-shrinking grouting compound for use in construction trades and plant maintenance. It is composed of a balanced blend of dry inorganic compounds, special cements, tough, high strength properly graded quartz aggregates, Silica Fume and other proprietary ingredients. SureGrout Plus does not contain slow reacting and unpredictable aluminum powders.
NCI SKU: BG1125N