Showing 161–200 of 974 results
Asphalt Expansion Joint
ASPHALT EXPANSION JOINT is the “original” expansion joint filler. It is composed of a blend of asphalts and mineral fillers formed under heat and pressure between two asphalt-saturated liners. It is waterproof, permanent, flexible, and self-sealing. ASPHALT EXPANSION JOINT can be used in 80% of all control joint applications. It is ideally suited for joints in sidewalks, driveways, streets, and single- and multi-level floor slabs. Due to its unique self-sealing characteristic, no subsequent joint sealing is required.
Asphalt Levelute NS Model
|EL2335||Lute Asphalt W/ Telescope Handle Ts636|
|EL2340||Lute Asphalt Head Only #Ns36 For El2400|
Our SS Series Lute has the thinner 1 and 1/4″ O.D. handle, and smaller “T” casting. When light weight is an extra concern this is the smallest and lightest tool available, it weighs under 4 lbs! Telescoping (adjustable) handle optional.
- Handle: 6 ft.
- Lute Bar: 36 in.
- Weight: 3 1/4 lbs.
36″ Lute head with 7′ handle
Use an asphalt lute to ensure that asphalt is spread quickly and evenly. Level and smooth asphalt with a variety of head and handle options. Order complete tool or individual replacement components separately. The handle is made of light weight magnesium. A slightly thinner wall thickness on our economy grade line reduces the overall weight while the slightly larger handle diameter assures reasonable strength against bending. A slightly smaller handle diameter on our premium grade line allows hands to relax more while working and allows a heavier wall thickness to resist bending, without increasing the weight of the lute. No angle braces are needed. The end is capped with a rubber tip. The head is made of wear-resistant aluminum alloy. Aluminum alloy holds heat better, making scrape off easier and teeth will not bend easily as with magnesium heads. An 1/8” thick tee-beam has a smooth edge on one side and serrated edge on the other. The smooth edge is used for final finishing pass leaving asphalt ready for compaction. The serrated edge has blunted teeth with rounded notches, permitting mix to flow through easily without “gumming up.” Standard head is serrated with a full tooth at each end. An un-serrated head with a smooth edge on both sides is available upon request.
Aviation Snips, Straight Cutting Pattern
The Klein 1102S Aviation Snips, Straight Cutting Pattern features forged and heat treated steel blades for strength and durability, regular blades have the capacity of cutting 18 gauge cold-rolled sheet metal, and 22 gauge stainless steel sheet metal, spring-loaded for self-opening action, latch keeps jaws closed when not in use, hardened handles for extra strength, and contoured plastic handles are comfortable and color-coded by cutting pattern.
- Forged and heat treated steel blades for strength and durability
- Regular blades have the capacity of cutting 18 gauge cold-rolled sheet metal, and 22 gauge stainless steel sheet metal
- Spring-loaded for self-opening action
- Latch keeps jaws closed when not in use
- Hardened handles for extra strength
NCI SKU: ES2059
AWT Rebar Tie Wire
AWT Rebar Tie Wire is made from the softest annealed wire available to assure you that it will consistently form the perfect tie every time. From a saddle tie, to the wrap and saddle, to the figure eight, the pliability of AWT’s tie wire makes every tie a snap. 16 gauge Black Annealed tie wire is packaged with 20 each 3 pound coils per box.
Available by the roll or box quantity.
B A Products 11-Rtlb-4, 5/16 – 3/8 G80 Heavy Duty Ratchet Load Binder -7300 Wll
5/16″ to 3/8″ G80 HEAVY DUTY RATCHET LOAD BINDER
For 5/16″ to 3/8″ Chain
NCI SKU: EB1330
BARR TYPE-I W/FLSHR FS A 6 VOLT RENTAL
- Type I barricade with spec “”A”” flasher light with 8″”x 24″” Eng. grade sheeting?right stripe on one side and left on the other. Units comply with NCHRP350 for channelizing devices.
- Minimum 100 unit day billing applies
Call For Quote
Barricade CAUTION DO NOT ENTER Tape, Yellow with Black Ink
Empire 77-1006 is made of brightly colored polyethylene with bold, black message, CAUTION DO NOT ENTER in 2-Inch letters. Plastic remains pliant in cold weather. 1000 Feet by 3-Inch roll.
Used for setting off areas under construction
Brightly colored polyethylene with bold, black message in 2-inch letter
Giant 1000-foot roll
Plastic remains pliant in cold weather
Made in USA
Barricade Leg A frame Plastic
O-Frame barricades are designed for low-speed municipal applications including crowd control, parking control and plank box utility closures. They are ideal for cordoning off an area during public events.
The price is for one O-frame leg. Two legs and and panel are pictured. Sold separately.
BARRICADE TYPE III
T3B™ Plastic Barricade Products are the perfect answer to the problem of how to comply with the requirements of Federal Report # NCHRP 350. Our barricade parts are lightweight; a six-foot X-Tube upright weighs only a little over 3 pounds, an eight-foot 1″ x 8″ T3B panel weighs only 5 pounds. The entire upright assembly for an 8-foot Type III T3B barricade weighs only 22 pounds!
|GB6295NHI||Barricade Type III 4' HiI|
|GB6395NHI||Barricade Type III 6' HiI|
|GB6495NHI||Barricade Type III 8' HiI|
BARRICADE TYPE-I W/SB FED SPEC C RENTAL
- Type I barricade with spec “”C”” steadyburn light with 8″”x 24″” Eng. grade sheeting?right stripe on one side and left on the other. Units comply with NCHRP350 for channelizing devices.
- Minimum 100 unit day billing applies
NCI SKU: VB1190
Barrier “Core Only”
The BarrierGate is a crashworthy, automated gate for barrier openings that allows you to restrict unauthorized access, eliminate dangerous barrier ends, and save lives. This system provides benefits to all who use the roadway system:
– Prevents illegal U-turns that cause serious accidents
– Provides convenient access to authorized personnel
– Improves emergency response times
– Increases maintenance productivity
– Ideal for rerouting traffic
NCI SKU: GB0700C
Barrier Inertial 1400
Barrier Inertial 2100
NCI SKU: GB2100
Barrier Inertial 400 sand filled plastic barrel (SFPB)
NCI SKU: GB0400
Barrier Inertial 700
NCI SKU: GB0700
The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot level, a Guardian Fall Protection Big Boss Extended Free Fall Lanyard must be used.
Bee Bopper Wasp And Hornet Spray
Spray nests from up to 20 ft. away
Stop outdoor workers from getting stings from bees, wasps, and hornets with Bee Bopper spray
Eliminates flying and crawling bugs and insects – indoors and out.
- Kills flying insects out of the sky with no harm to the user
NCI SKU: GR1975