Showing 201–240 of 974 results
Big Mike Roller Frame
- 9″”W x 14″”L
- Flat outboard end cap eliminates tracking
- Perfectly balanced to reduce fatigue
- Threaded plastic handle
BIG MIKE PROFESSIONAL ROLLER FRAME *9″W x 14″L *Patented 5 wire ring cage welded construction forms a rugged one-piece cage *Flat outboard end cap eliminates tracking *Perfectly balanced to reduce fatigue *Handle is grained polypropylene threaded and solvent resistant and contoured for long-lasting comfort.
NCI SKU: ER1268
Black Annealed American Wire Double Loop Wire Ties
Black Annealed American Wire Ties are made of dead-soft annealed wire – pliable, yet tough; easy to twist, but hard to break. 16 gauge x 6″ OR 8″ double loop tie
Black Tampico Floor Brush
- Use on heavier packed soils
- Use on higher temperature soils in the factory and machine shops. Bristles won’t melt.
- Select 3″ Trim or stiffer 2-1/2″ Trim construction
- 2-7/8″ wide x 7/8″ thick wood block with 2 threaded handle holes
- Order handles separately
Handles have heavy vinyl grips with flat grips ends for 90° cuts. All-purpose, center-cut jaws for soft, medium, and hard metals. Forged, alloy tool steel jaws are precision ground for sure, efficient cutting and long life. Lockplate reinforcement prevents jaw bolts from loosening or turning, keeps jaws in correct alignment. One adjustment realigns cutting edges.
- Handles have heavy vinyl grips with flat grips ends for 90° cuts.
- All-purpose, center-cut jaws for soft, medium, and hard metals.
- Forged, alloy tool steel jaws are precision ground for sure, efficient cutting and long life.
- Lockplate reinforcement prevents jaw bolts from loosening or turning, keeps jaws in correct alignment.
- One adjustment realigns cutting edges.
|63318||EC2375||18-Inch Bolt Cutter – Steel Handles||18″|
|63324||EC2400||24-Inch Bolt Cutter with Steel Handles||24″|
|63330||EC2425||30-Inch Bolt Cutters with Steel Handles||30″|
|63336||EC2450||36-Inch Bolt Cutter – Steel Handles||36″|
|63342||EC2475||42-Inch Bolt Cutter with Steel Handles||42″|
Always wear approved eye protection.
NOT insulated. Will NOT protect against electrical shock.
Brilliant Series High-Viz Long RainCoat, Lime
This Brilliant Series high visibility rain jacket is made to protect you from the elements with durable, breathable & water-proof material 150-denier fabric.
- ANSI Class 3 compliant
- Made from 150-denier polyester oxford fabric with PU coating
- Durable, breathable & water-proof material with sealed seams
- Black lower design to maintain a clean look
- 2-inch silver reflective striping
- Reflective piping on shoulders, hood, and sleeves
- Zipper front with storm flap closure
- Lower front patch pocket with flap
- Non-sparking snaps and zipper
- Available in Lime and Orange
View: Sizing Chart
NCI SKU: GR1661
Bucket Of Safe-Tie
The Guardian Fall Protection Bucket of Safe-Tie is a roofing kit built for the roofer, by the roofer. It is one of the few kits available on the market that includes a lifeline with an integrated shock absorber, which allows the worker to never have to worry about incorporating an additional shock absorbing lanyard into their fall protection system. Removing the shock absorbing component from the worker
Cable Vehicle OBD to NS TCI200
NITESTAR® OBD-II Interface Adapter TCI200
Makes it Possible to Attach a DMI Using Your Vehicle’s OBDII Port The OBD-II Interface Adapter TCI200 allows the DMI to be used in virtually any vehicle with an OBDII port. No additional power cables are needed since the Adapter supplies power from the OBDII port. Installation is as simple as plugging one end of the Adapter into your OBDII port and the other into your NITESTAR DMI.
NCI SKU: GN3405
Cartridge assembly for SS90HD TMA
The SS90HD is a heavy duty, potentially reusable truck mounted attenuator (TMA) available for use on stationary or moving shadow/support vehicles. This TMA has passed all mandatory and optional testing and is NCHRP Report 350 Test Level 3 compliant. Additionally, the SS90HD has passed the UK TD 49, 110 km/h (68 mph) test.The unit is comprised of two light-weight aluminum cartridges contained in a potentially reusable galvanized support frame. The SS90HD helps to absorb rear-end impacts at speeds up to 62 mph (100 km/h) when impacted according to NCHRP350 crash test standards.
– 13’2” (3.98m) length from back of truck
– 93” (2.36m) wide – 1996 lbs (906 kg)
– 12” (3055 mm) road clearance
– 16,090 lbs (7300 kg) minimum support vehicle weight
Cement Edger 6 x 2-1/2 in. 1/4 in. Radius with Wood Handle
Carbon steel concrete edger. Wood handle.
NCI SKU: EE1100
Cement Trowel w/Camel Back Wood Handle
This flat trowel is ideal for slabs, sidewalks, driveways, and everything in between. Finish concrete to the perfect finish with this trowel. Curved camel back wood handle on a high-strength, lightweight aluminum mounting. Proudly made in the USA.
- Compression fit stainless steel rivets
- Guaranteed “NO TURN” handle design locks handle to mounting