Shop
Showing 241–280 of 974 results

Channel 48″ Neutral Section
Cast-in dimples at bottom of channel to attach installation chair
NCI SKU: AC5490

Channel End Cap Close Inlet
POLYCAST® Universal Male End Caps are used to enclose or provide 4” pipe inlets to the female channel ends. Inlets accommodate 4” pipes.
NCI SKU: AC5665

Channel End Cap Close Outlet
POLYCAST® DG0670 Grate is a high density polyethylene slotted
grate appropriate for corrosive applications or where sanitary
conditions are necessary. Provides excellent chemical resistance
and durability. Polyethylene construction helps protect bare feet.
Grating locking device Part No. DA0642 (not shown) should be
used and maintained secure. The grate has 18% (18 in²) of open
area. The grate weighs approximately 4lbs [1.81kg] and is only
available in 24″ [610mm] length.
Open Area: 11 in2 /Linear Foot
Dimensions: 5-1/4” x 24”
Weight: 4 lbs.
Slot Size: 0.32″ x 2.95″
NOTE: Part No. DG0670G
available, color: gray
NCI SKU: AC5678

Channel End Cap Closed
Drain end caps are available for 3” PVC pipe. Solid end caps are also available toseal off the ends of the channels.
NCI SKU: AC5663

Channel End Cap Drain 3″
Drain end caps are available for 3” PVC pipe. Solid end caps are also available toseal off the ends of the channels.

Channel Female Adaptor
Male and Female Transition Devices (699F & 699M) are available
where channel runs are in opposite directions and two channels
are set either female to female or male to male. A female
transition piece (699F) is used to fill the top space of the female
to female joint (this applies to 600 Series only). An epoxy grout
or urethane sealer can be used to smooth over the gap on the
inside bottom of the channel. A male transition piece (699M) is
used to lap under the male to male joint.
NCI SKU: AC5705

Channel Grate Galv Steel 24″
Open Area: 10.2 in2
/Linear Foot Dimensions: 5-1/4” x 24” or 48”
Weight: 4 lbs. or 8 lbs.
Slot Size: 0.28″ x 3.00″
NCI SKU: AC5680

Channel Grate Sloted Galv Steel
Open Area: 10.2 in2
/Linear Foot Dimensions: 5-1/4” x 24” or 48”
Weight: 4 lbs. or 8 lbs.
Slot Size: 0.28″ x 3.00″
NCI SKU: AC5670

Channel Installation-Chair
The POLYCAST
Installation Chair is
the most efficient and
economical means of setting
a precast trench system. The
installation chair supports the ends of
the channels, aligns and locks the joint rigidly
together, and prevents the channels from floating.
Adjusting channel elevation is easy with the
POLYCAST Installation Chair.
NCI SKU: AC5683

Channel Lock Device F/Ci Grate
Open Area: 19.8 in2
/Linear Foot Dimensions: 5-1/4” x 24”
Weight: 15 lbs.
Slot Size: 0.50″ x 4.19″
NCI SKU: AC5695

Channel Lock Device F/Poly Grate
Grate hold-down devices are to be used with all grating systems where wheel traffic occurs. This is necessary to provide system integrity
NCI SKU: AC5692

Channel Male Adapter
Male and Female Transition Devices (699F & 699M) are available
where channel runs are in opposite directions and two channels
are set either female to female or male to male. A female
transition piece (699F) is used to fill the top space of the female
to female joint (this applies to 600 Series only). An epoxy grout
or urethane sealer can be used to smooth over the gap on the
inside bottom of the channel. A male transition piece (699M) is
used to lap under the male to male joint.
NCI SKU: AC5700

Channelizer Drum
Made of low density polyethylene plastic with four 6″ bands of 3M Diamond Grade reflective sheeting. Accommodates barricade Type A or C lights. Tested and certified to meet the crashworthy requirements of NCHRP-350 with and without lights. Meets or exceeds all MUTCD specifications. Accepts tire ring and many rubber bases. Dimensions: 36.77″H x 22.94″W (40.02″H with handle) Weight: 8 lbs.
Available with 27lb tire ring base.
Please call for quantity break pricing.

Channelizer Drum Top Only
Made of low density polyethylene plastic with four 6″ bands of 3M Diamond Grade reflective sheeting. Accommodates barricade Type A or C lights. Tested and certified to meet the crashworthy requirements of NCHRP-350 with and without lights. Meets or exceeds all MUTCD specifications. Accepts tire ring and many rubber bases.
DRUM TOP ONLY, DOES NOT INCLUDE WEIGHTED BASE.

Channelizer Navicade Tall Cone
Made of high density polyethylene (HDPE) plastic. Navicade cones are very durable and designed to rebound after impact. Comes with four stripes of 6″ 3M High Intensity reflective sheeting. This versatile channelizer is recommended for Lane closures, Work zones, and Crowd control.
NCHRP-350 Accepted and Meets MUTCD Standards. Dimensions: 49.25″H x 7.6″W, Weight: 3 lbs.
Cone and 16lb rubber base are sold separately.

Chrome Finish Adjustable Wrench
- World Famous Crescent® Brand, Made in the USA
- For Professional, Industrial or Home Use
- Wide Capacity Jaw Allows Each Tool to Work with More Fastener Sizes
- Wider Handle Provides More Comfort and Less Stress to the Hand
- Tension Spring Stabilizes Jaw and Knurl Adjusts Easily
- Alloy Steel and Heat Treated
- Proportioned Dimensions for Greatest Strength and Minimum Weight
- Chrome Plated Finish Resists Rust and Corrosion
- Polished Head and Regular, Satin Finished Handle

Citation 932 Amber Lens
- Twin spherical lenses integrated in a single lens design for men and women, molded in nose piece
- Ratchet/adjustable temples, impact resistant polycarbonate lens provides 99.9 percent UV protection and scratch resistant coating
- Optional anti-fog lenses are available, all combine to ensure this product has a wide range of worker acceptance
- UVA-UVB protection”
NCI SKU: GS19149

Citation 932 Blue Diamond Mirror Lens
- Twin spherical lenses integrated in a single lens design for men and women, molded in nose piece
- Ratchet/adjustable temples, impact resistant polycarbonate lens provides 99.9 percent UV protection and scratch resistant coating
- Optional anti-fog lenses are available, all combine to ensure this product has a wide range of worker acceptance
- UVA-UVB protection”
NCI SKU: GS19031

Citation 932 Clear Lens
”
- Twin spherical lenses integrated in a single lens design for men and women, molded in nose piece
- Ratchet/adjustable temples, impact resistant polycarbonate lens provides 99.9 percent UV protection and scratch resistant coating
- Optional anti-fog lenses are available, all combine to ensure this product has a wide range of worker acceptance
- UVA-UVB protection”
NCI SKU: GS19020

Citation 932 Gray Lens
- Twin spherical lenses integrated in a single lens design for men and women, molded in nose piece
- Ratchet/adjustable temples, impact resistant polycarbonate lens provides 99.9 percent UV protection and scratch resistant coating
- Optional anti-fog lenses are available, all combine to ensure this product has a wide range of worker acceptance
- UVA-UVB protection
NCI SKU: GS19021

Clear Safety Glasses (Pack of 12)
The BearKat’s® super well thought-out construction combines the best in safety, comfort, and affordability! Your vision is unobstructed by the one-piece wraparound lens, which by its tight fit allows you maximum safety and almost 0% of your vision outside lens view. Comfort is enhanced by the flexible temples and the non-slip rubber head grips are notched for a clip-on breakaway cord!
Features
- Single wraparound lens design
- Flexible temple design
- Polycarbonate lens
- Non-slip rubber head grips
- Items BK010, BK110, BK210 & BK220 meet military MIL-PRF-31013 clause 3.5.1.1 for high velocity impact protection
- Vending-Ready bulk packaging available
- Bearkat® Small is 17% smaller than original Bearkat®
NCI SKU: GS1330

Clevis Grab Hook

Clip-on Disposable Sweatband
Clip-On AA102 Sweatband,
Bulk
- Blue quilted nylon shell with fastener straps
- Three layers of thick foam padding
- Soft fleece interior
- For temperatures 32° to 0° F (or 0° to -20° C)

Coarse Grit Surface Anti-Slip Tape
Anti-Slip Safety Tapes provide a safe, non-slip surface under shoe traffic to prevent unnecessary slips and falls. A flexible vinyl backing filled with a gritty mineral abrasive to deliver traction on flooring in work areas, stair treads, construction equipment, ramp ways, transportation and recreational vehicles. These tapes are designed for indoor and outdoor use wherever a non-skid surface is required.
Roll size: 2″x60′, Color: Black

Coat Parka Lime
2″ Silver Reflective Tape On Front and Back Heavy Insulated High Visibility Lime Mid-Length Coat
Collapsible Hood with Drawstrings For Added Versatility
Reinforced Seams For Strength And Durability
Sizes Available: L – 4Xl
NCI SKU: GC1650-GC1650XXXXL

Combination Gas and Vapor Cartridge
- The North Safety 75SCP100 multi-purpose respirator cartridge is designed for use against Organic Vapor, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide (Escape), Hydrogen Fluoride, Chlorine Dioxide, Ammonia, Methylamine and Formaldehyde vapors. This cartridge also includes a built in P100 particulate pre-filter.
- P100 respirator cartridges are NIOSH certified to have filter efficiency level of 99.7% or greater against oil and non-oil based particulates
- The North 75SCP100 cartridges can be used with any North Safety full or half-face mask respirators. Package contains 2 cartridges. North respirator masks sold separately.
NCI SKU: GC1336

Concrete Mix
The strength, versatility and durability of concrete makes it a very common building product. There are many different types of concrete from which to choose, and additives make a wide range of colors possible. Larger projects like driveways can be labor intensive, but smaller jobs like setting fence posts or mailboxes are relatively easy. Knowing how to handle concrete and which type is right for the job at hand will help you achieve the best possible results.
NCI SKU: AC1250