Bollard Cover
Maintenance-free protection with a clean, finished look.
| MODEL NO. | FITS POST SIZE | DIAMETER | HEIGHT | |
| OUTSIDE | INSIDE | |||
| H-3008Y | 6″ | 7 1/8″ | 6 7/8″ | 56″ |
NCI SKU: GB1520
Home Park It Parking Curb
The Home Park It® provides guidance to help residents park with confidence in limited space. This unique home parking solution protects valuables and prevents damage in and around the garage or parking area. Constructed of recycled rubber and molded with GNR’s highly reflective highway tape, the Home Park It® is highly visible and extremely durable.
The Home Park It® is 22 inches long and 4 inches high. It is covered by a 3 year warranty; 1 year on the tape (under normal use).
Parking Block
The rubber Park-It® parking curb is used to effectively guide cars when pulling into a parking space. It is profiled at 4″ high, safeguarding potential damage to today’s low, front end car designs. They are more resistant than concrete or plastic curbs. Easily installed on asphalt with rebar spikes or concrete with lag bolts and lead shields. Installation hardware is sold separately.
- 100% recycled rubber
- Ideal for indoor or outdoor parking
- Molded highly reflective tape
- Simple installation by one person
- Will not chip, crack, or fade
- 1/10th the weight of standard concrete curb
- Warranty: 3 years on the product; 1 year on the tape (under normal use)
| SKU#: | NCI SKU#: | Info: | Installation |
| 16101 | GB1445N | 6′ Parking Block w/ yellow tape | 4 spikes needed |
| 16201 | GB1450N | 6′ Parking Block w/ white tape | 4 spikes needed |
| 16201B | GB1456N | 6′ Blue Parking Block w/ white tape | 4 spikes needed |
| 91400 | GB1460 | 14″ Rebar Spike | for asphalt use |
| 91500 | GB1462 | 6″ Lag Bolt | for concrete use |
| 91501 | GB1463 | Lead Shield | for concrete use |
Speed Bump
The Easy Rider® speed bump is available in 4′ and 6′ lengths. End caps are available to protect the speed bump ends and vehicles. Easily installed on asphalt with rebar spikes or concrete with lag bolts and lead shields. Installation hardware is sold separately.
- 100% recycled rubber
- Reduces speed to 2-5 mph
- Molded highly reflective tape
- Product can be installed in sections to create varying lengths
- Will not warp, crack, chip or rot
- Channeled bottom for cabling and piping
- Warranty: 3 years on the product; 1 year on the tape (under normal use)
| SKU#: | NCI SKU#: | Info: | Installation |
| 24111 | GB1470N | 4′ Speed Bump w/ yellow tape | 3 spikes needed |
| 26111 | GB1475N | 6′ Speed Bump w/ yellow tape | 4 spikes needed |
| 26999 | GB1476N | Speed Bump End Cap | 1 spike needed |
| 91400 | GB1460 | 14″ Rebar Spike | for asphalt use |
| 91500 | GB1476N | 6″ Lag Bolt | for concrete use |
| 91501 | GB1476N | Lead Shield | for concrete use |
Speed Hump
The Safety Rider® V mini speed hump is an economical speed reduction device made from vulcanized rubber. Unlike asphalt, the rubber mini hump is molded to spec creating a uniform and reliable solution to slow vehicle traffic. The mini humps are simple to install and do not require road closures or ideal weather conditions. Installs with lag bolts, washers, and shields which are included with the product.
- 100% recycled rubber
- Dimensions: (L) 35.4″ x (W) 19.7″ x (H) 2″
- Interlocking tongue and groove system
- Molded highly reflective tape
- Product can be installed in sections to create varying lengths
- Will not warp, crack, chip or rot
- Warranty: 3 years on the product; 1 year on the tape (under normal use)
| SKU#: | NCI SKU#: | Info: |
| 23500V | GH1945 | Speed Hump |
| 23501V | GH1946 | End Cap (female) |
| 23502V | GH1947 | End Cap (male) |