10′ Web Retractable Lifeline
The Guardian Fall Protection Web Retractable Lifeline is designed with an ergonomic frame to make handling more comfortable for the user. It is also supremely lightweight and features a durable aluminum housing. With its quick-action braking system, this lifeline offers ultra-dependable performance, and it also meets or exceeds all applicable OSHA and ANSI regulations.
10K Concrete Anchorage Connector
The Guardian Fall Protection 10K Concrete Anchorage Connector is designed for use in 10 inch thick, cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 10K Concrete Anchorage Connector fits holes of 1 inch in diameter and 4
11-Foot Yellow Jacket Cable SRL
The Guardian Fall Protection “Yellow Jacket Cable Retractable” is a lifeline system that offers a compact and lightweight design. The Yellow Jacket Retractable has been machined and fabricated specifically to reduce the weight of the retractable, making it small and compact making it easier to handle. This product is composed of stainless steel and non-corrosive internal components that are protected via its durable ABS reinforced housing. The proprietary ABS housing is supported by an inside steel brace which increases the overall durability of this lightweight retractable. The retractable possesses a high strength composite cable guide and quick action braking system, and so, meets or exceeds all OSHA and ANSI standards. The interior brake body is specifically designed to reduce the amount of debris that enters the braking mechanism and helps protect the deceleration components. This product comes with a swivel top and carabineer. This retractable lifeline is fully repairable and manufactured in the USA.
- Compact and lightweight design
- Durable ABS reinforced housing
- High strength composite cable guide
- Stainless steel and non-corrosive internal components
- Quick-action braking system
NCI SKU: GR1111C
2-Person Horizontal Lifeline Kit
The Kernmantle HLL System is a temporary and reusable 2-person Fall Arrest system, and includes (1) 60 foot Kernmantle rope, (1) Ultra-Sack for system transport and storage, (2) O-rings, (2) anchorage web slings, (1) rope tensioner, and (2) high strength carabineers. Always ensure that all aspects of the installation of HLL systems are done under the supervision of a Qualified Person.
NCI SKU: GR1160
4-Person Rope Horizontal Lifeline Kit
The Guardian Fall Protection Big Boss Horizontal Lifeline is a temporary, reusable lifeline system that can be used by up to 4 workers simultaneously in Fall Arrest applications. It may span up to a maximum 82′, and includes a rope bag for easy transportation and storage. This system can be easily set-up by just one person, but always ensure that all aspects of horizontal lifeline installation, inspection, and maintenance are supervised by a Qualified Person.
NCI SKU: GR1665
5K Concrete Anchorage Connector
The Guardian Fall Protection 5K Concrete Anchorage Connector is designed for use in 12 inch thick cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 5K Concrete Anchorage Connector fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.
ANCHOR BEAM I&H
The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot level, a Guardian Fall Protection Big Boss Extended Free Fall Lanyard must be used.
ANCHOR ROOF TEMPER REUSABLE
The Guardian Fall Protection Temper Reusable Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. It can fit all roof pitches from flat to 12/12, is composed of thick plated steel for longer lasting product life, and is ideal for Fall Arrest and Restraint applications. This anchorage connector can be installed with either screws or nails (depending on roof pitch), and its designed offset holes down the center help keep the truss from splitting. Supplied with all necessary fasteners (always use new fasteners for each new installation application).
ANCHOR SLING 10′ D-R
The Guardian Fall Protection Premium Cross Arm Strap is twice as durable as our standard model due to its dual enforced webbing and heavy duty stitching. Its heavy duty wear pad protects webbing against abrasion and snags, and it features standard and large size D-rings, which help increase the versatility of length adjustment. To shorten the length of the Premium Cross Arm Strap, simply wrap the webbing around the anchor point and pass through the large D-ring multiple times until the desired length is reached.
ANCHOR SLING 4′ LOOP
The Guardian Fall Protection Cross Arm Strap is a durable anchorage connector that can be used in a variety of fall protection applications. It consists of a small D-ring and pass-through loop (or second, larger D-ring), and is designed for quick and easy installation. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Then, connect a snaphook or carabineer component of a complete and compatible PFAS to the Cross Arm Strap small D-ring.
Cyclone Construction Harness
The Cyclone Construction Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. This harness features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate support when combined with the Velcro waist belt. Includes back and side D-rings.
Buckle configuration: Quick-Connect chest – Tongue&Buckle legs – Tongue&Buckle waist
The new Diablo Self-Retracting Lifeline (SRL) offers superior protection, and its design makes it supremely lightweight and durable. The new Diablo SRL is available with steel or aluminum snap hooks or rebar hooks, and can be purchased on its own, or in a kit of two, which allows it to transform into a double unit. When the job requires a highly mobile and sturdy SRL, the Diablo is the perfect choice. The Diablo Single SRL includes a carabiner and the Diablo Double SRL Kit includes a carabiner and connector bracket. When used in combination with proper PPE (i.e., harness and anchor), the Diablo SRL has a capacity range up to 420lbs.
Multiple hook configurations available
Double SRL Kits available
|11016||GR1100||Diablo Snap Hook|
|11052||GR1103||Diablo Double Srl Kit W/ Aluminum Snap Hook & 11055|
|11054||GR1104||Diablo Double Srl Kit W/ Steel Rebar Hook & 11055|
Edge Angel 30′ SRL
The Guardian Fall Protection Edge Angel SRL is designed specifically for Leading Edge work. It includes an integrated shock absorbing component that helps refocus forces away from the portion of the cable that comes into contact with the edge. While the ideal position for any attachment point is overhead, Leading Edge retractables play an important role in the construction industry because, frequently, the only viable attachment point is at foot level. Most SRLs on the marketplace are not certified for such applications, but the Heavy Duty Edge is no common SRL, and holds up against even the toughest use.
Edge Series 20′ SRL
The Guardian Fall Protection Edge Series 20′ cable Self Retracting Lifeline w/ snap hook. Its durable aluminum housing, high strength composite cable guide, and non-corrosive components all make this SRL supremely compact and lightweight. It incorporates a quick-action breaking system, and meets or exceeds all OSHA and ANSI standards.
HARNESS PADDED 1 D-R
The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support.
Buckle configuration: Quick-Connect chest – Tongue & Buckle legs
HARNESS PADDED 3 D-R
The Guardian Fall Protection Seraph Construction Harness is specially designed with six points of adjustment, dorsal and side D-rings, and improved elasticity in the shoulder and back for added comfort. It includes an integrated impact indicator that clearly identifies if it has been exposed to forces of a fall, lanyard keepers, and is easy to adjust.
HARNESS ROOF KIT
The Guardian Fall Protection Bucket of Safe-Tie is a roofing kit built for the roofer, by the roofer. It is one of the few kits available on the market that includes a lifeline with an integrated shock absorber, which allows the worker to never have to worry about incorporating an additional shock absorbing lanyard into their fall protection system. Removing the shock absorbing component from the worker
Heavy Duty Edge Series 50′ SRL
The Guardian Fall Protection Heavy Duty Edge Series SRL is designed specifically for Leading Edge work. It includes an integrated shock absorbing component that helps refocus forces away from the portion of the cable that comes into contact with the edge. While the ideal position for any attachment point is overhead, Leading Edge retractables play an important role in the construction industry because, frequently, the only viable attachment point is at foot level. Most SRLs on the marketplace are not certified for such applications, but the Heavy Duty Edge is no common SRL, and holds up against even the toughest use.
Kernmantle Rope Horizontal Lifeline System
The Guardian Fall Protection Kernmantle Rope Horizontal Lifeline System is a temporary, reusable, two-person system designed for Fall Arrest applications. It includes (1) 100′ Kernmantle Rope, (1) Ultra-Sack storage bag, (2) O-rings, (2) cross arm straps, (1) rope tensioner, and (2) self-closing and self-locking carabineers. The Ultra-Sack is convenient, durable, and ideal for transporting equipment around the jobsite, and also offers protection from contaminants. The two cross arm straps function as durable anchorage connectors that can be reused in multiple applications. Always ensure that all aspects of horizontal lifeline installation, inspection, and maintenance are supervised by a Qualified Person.
NCI SKU: GR1161
Lanyard 6′ Internal Shock Absorb
The Guardian Fall Protection Internal Shock Lanyard is comprised of heavy duty outer polyester webbing, with a polyester core specifically designed to reduce the impact forces resulting from a fall. Because the shock absorption is built directly into the lanyard there is no need for an external shock absorber, making the Internal Shock Lanyard a particularly lightweight option.This lanyard is available in single or double leg models, and with either snap or rebar hook connectors.
Lanyard Chain Double Rebar Hook
The Guardian Fall Protection Rebar Positioning Device is perfect for Work Positioning applications on rebar structures. Its double legs allow workers to lean away from walls, while keeping their hands free to perform any necessary work. To function correctly, it must be used in combination with a full-body harness with side positioning D-rings, so that both snap hook components can be properly attached.
NCI SKU: GL1105
Lifeline Poly Steel Rope 50′ With Snap Hook End
The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick.
MK Edge Series 65′ SRL
The MK Premium Edge SRL is another great addition to our quality line of SRLs. It is both lightweight and supremely durable, and incorporates corrosion-resistant stainless steel and aluminum components to ensure superior functionality throughout the product lifetime.
The O-Torque Beamer, which is made from aluminum, stainless steel, and chrome-plated steel components, is suitable for both horizontal and vertical installations onto steel I and H beams, making it both a supremely versatile and durable anchorage connector. It is compatible with beams with widths ranging from 4–1/2″ – 12″, and flange thicknesses ranging from 1/2″ – 2″, and may be used in either fall arrest or fall restraint applications. Incredibly simple to install, the O-Torque Beamer can easily be moved between installation locations.
While it may initially be difficult to believe, one of the most hazardous elements of a fall from heights does not involve the fall itself, but the prolonged effects of being suspended in a full-body safety harness after a fall. Because of this, Guardian Fall Protection designed the Rescue G Loop specifically to help relieve the negative and potentially deadly effects of suspension related trauma. A supremely compact and lightweight device, the Rescue G Loop is deployed by a fallen worker to enable them to stand up in their harness to relieve pressure from their limbs. It easily attaches to any harness with its textile and Velcro loops, and can make the difference between walking away from a fall and being carried away from a fall. It is important to note that this equipment will not be usable by an unconscious victim, and should only be considered as an intermediate measure for use until rescue and recovery occur.
Helps relieve 'suspension trauma'
Compact & lightweight
Allows suspended worker to stand up in harness
Easy to attach
Easy deployment & full-proof operation
NCI SKU: GL1265
Retrieval System Complete (Arc-O-Pod)
The Guardian Fall Protection Arc-O-Pod is an affordable, high quality Rescue and Retrieval system. The Arc-O-Pod is a 7 foot aluminum tripod that is lightweight, portable, and easily set up by just one worker. It also includes a storage bag for easy transportation between jobsites. Its adjustable, locking legs can be sized in 2 inch increments to best fit the layout of a given work area, and are kept in position with locking push pins. The tripod can be sized to fit a maximum 5—1/2 foot diameter hole, and is specially designed to eliminate all risk of slippage or movement when in use. Its heat-treated cast aluminum head incorporates a built-in pulley system to facilitate the proper use of mechanical lifeline equipment, and is also equipped with drop forged steel eyebolts for use as an anchorage point for a secondary or back-up system. The Arc-O-Pod also comes complete with a quick-mount bracket and compatible with the Guardian 3-Way SRL. This system is certified to withstand a load of up to 5,000 pounds, and is compliant with all applicable ANSI Z359.1-2007, ANSI A10.14-2004, and OSHA regulations.
#20001 Complete Kit includes: Tripod, storage bag, bracket, and 50′ 3-way Self Retracting Lifeline.
NCI SKU: GL1269
The Guardian Fall Protection removable Rope Grabs are easy to install and designed to lock automatically when a fall occurs. This rope grab model is designed to fit 5/8 inch to 5/16 inch thick safety ropes. Simply squeeze to move positioning device and it will lock automatically.
NCI SKU: GR1151
Velocity Harness 1 with D-RINGs
The Guardian Fall Protection Velocity Harness is one of the best available economy harnesses on the market. Revamped from older, basic designs, the Velocity is one of our most popular models. It offers dual lanyard keepers that reduce the risk of excess webbing getting in the way during work, as well as a customizable patch that allows workers to customize harnesses without jeopardizing webbing integrity. The Velocity is designed to present a clean, professional look on the job. It incorporates a red webbing core to provide an easily recognizable indicator of damage, and is supremely durable and lightweight.
Velocity Harness 3 with Side D-rings
The Guardian Fall Protection Velocity Harness is the best available economy harnesses on the market. One of our most popular harness models, the Velocity offers dual lanyard keepers that reduce the risk of excess webbing getting in the way during work, as well as a customizable patch that allows workers to record information on harnesses without jeopardizing webbing integrity. The Velocity is designed to present a clean, professional look on the job. It incorporates a red webbing core to provide an easily recognizable indicator of damage, and is supremely durable and lightweight. Includes back and side D-rings.