
Concrete Sealer
High solids, rubber-base coating, available either clear or pigmented. Acid and alkali resistant, it may be applied over acrylic curing compounds without acid etching.
Clear
55 gal. drum or 5 gal. pail
Pigmented
NCI SKU: BS1150

Curing White Md
SureCure 25 is a pigmented, ready-to-use, acrylic rubber copolymer for curing and sealing of concrete slabs. Specifically designed for interior, exterior concrete, and masonry floors, SureCure 25 imparts a pleasing color with a degree of opacity, which obscures variations in the color of the concrete due to poor placement and/or finishing.
Type 275 Gal Tote
NCI SKU: BC1375

Curing White Md
SureCure 25 can be used on new or aged concrete surfaces to provide a durable, long lasting membrane that is resistant to abrasion, chemicals, paint, oil, and grease. Surfaces to be treated can be damp or dry; interior or exterior.
Type 5Gal/Can
NCI SKU: BC1365

Curing White Va
SureCure 25 can be used on new or aged concrete surfaces to provide a durable, long lasting membrane that is resistant to abrasion, chemicals, paint, oil, and grease. Surfaces to be treated can be damp or dry; interior or exterior.
Type 5Gal/Can
NCI SKU: BC1366V

Curing White Va
SureCure 25 can be used on new or aged concrete surfaces to provide a durable, long lasting membrane that is resistant to abrasion, chemicals, paint, oil, and grease. Surfaces to be treated can be damp or dry; interior or exterior.
Type “Drum”
NCI SKU: BC1371V

Dr Cure
DR Cure is recommended for application to concrete surfaces to prevent the evaporation of water from the surface of freshly placed concrete. This film is recommended for use when the surface will later receive a covering, coating, or penetrating water repellent.
55 Gal. Drum
NCI SKU: BC1325

Retarder Surface Expose
Expose chemical retarder that provides a simple,
economical method of exposing aggregates for
freshly poured concrete flat work. The organic
compounds react with components in concrete to
slow the strength gain on the surface and allow the
mortar to remain workable for a longer time. Due to
the controlled penetration, Expose allows the
concrete underneath to harden normally. After the
concrete has set for up to 1 day after application,
the retarded mortar surface can be brushed off with
a stream of water and a stiff bristled brush. Expose
produces consistent, repeatable results without hot
spots for depths of up to 3/16”.
NCI SKU: BR1100

Sure Plug
SurePlug is a fast setting, non-shrinking, hydraulic
cement compound, formulated to stop leaks in all
types of concrete or masonry surfaces; and is
particularly designed to instantly stop the flow of
running water. SurePlug requires the addition of
only water before plugging and sealing cracks.
Available in three set times of 30 seconds (Fast
Set), 1 minute (Regular Set), and 3 minutes (Slow
Set).
15-Lb. Can

Sure Plug
SurePlug is a fast setting, non-shrinking, hydraulic
cement compound, formulated to stop leaks in all
types of concrete or masonry surfaces; and is
particularly designed to instantly stop the flow of
running water. SurePlug requires the addition of
only water before plugging and sealing cracks.
Available in three set times of 30 seconds (Fast
Set), 1 minute (Regular Set), and 3 minutes (Slow
Set).
50-Lb. Can
NCI SKU: BS1300

Suregrout Plus
SureGrout Plus is a precision made, ready to use, non-shrinking grouting compound for use in construction trades and plant maintenance. It is composed of a balanced blend of dry inorganic compounds, special cements, tough, high strength properly graded quartz aggregates, Silica Fume and other proprietary ingredients. SureGrout Plus does not contain slow reacting and unpredictable aluminum powders.
NCI SKU: BG1125N