Fiber-Reinforced Rubber Wheel Chock
- Wheel chocks are molded from a tough fiber-reinforced rubber compound
- Well suited for tractor trailers and other heavy equipment
- Available in black color
- Measures 8-inches length by 6-inches width by 9-inches height
NCI SKU: GC1369
Flagging Tape
- Typically used in construction environments for surveying, mapping, and roping off an area.
- Non adhesive PVC carrier ensures no residue left behind.
Heavy-Duty Nylon Airport Flag
Mutual airport flag with a 60-inches wooden staff. A heavy nylon flag made of alternating 12-inches length by 12-inches width orange and white squares. Heavy-duty stitching and reinforced pocket make for easy mounting. Required by FAA and OSHA for all construction equipment and contractor vehicles in airports. Measures 36-inches length by 36-inches width.
- Heavy-duty nylon airport flag with 60-inches staff
- Made of alternating orange and white squares measure 12-inches length by 12-inches width
- Heavy-duty stitching and reinforced pocket make for easy mounting
- Required by FAA and OSHA for all construction equipment and contractor vehicles in airports
- Measures 36-inches length by 36-inches width
NCI SKU: GF2080
I-Cone Traffic Data Collector
The Wanco Traffic Data Collector provides a safe, non-intrusive method for monitoring and analyzing traffic patterns. Employing side-fire radar to measure vehicle speed and length, the Wanco Data Collector uses no wires, loops or hoses. Analytic graphing software is included, to make charting traffic data easy.
- Collects and classifies traffic data
- Nonintrusive and safe to install
- Analytic graphing
- Data analysis for any purpose
- Remote access with optional modem
Features and Benefits
- Tool for traffic engineers to investigate lane flow, speed and density
- Use collected data to make decisions and recommendations for managing traffic
- Investigate and validate complaints from citizens, neighborhoods and contractors
- Planners can back up needs and recommendations with real data
- Decide when to put police on the roads
- Prove the need for traffic controls
- Low-cost solution
- Nonintrusive, no disturbance of traffic flow during installation or use
- Radar-based design is less dangerous to install than loops and hoses
- Most effective for two-lane roads
- Counts both approaching and departing vehicles
- Side-fire radar system captures date and time, traffic volume, and vehicle speed, direction and length
- Registers more than 1 million vehicles in internal memory
- Analytic graphing application charts count vs. speed, volume over time, and means & percentiles
- Durable enclosure is weathertight, lockable and portable
- No exposed components, installed enclosure is inconspicuous
- Can be added to virtually any Wanco product—speed trailers, message signs, beacon kits and more
With optional modem, data can be retrieved remotely via the Internet
NCI SKU: GI1360
i-Flex Guard Rail Reflector
The IBM allows you to protect your investment in guardrail with significantly reduced installation costs. IBMs fit over all steel I-Beam guardrail posts and are available with a choice of reflective sheeting which may be applied to one or both sides. 12 YLW 1 WAY 3X4.
NCI SKU: GR1672
Light Flash/revolve Mag.
This new LED combination flashing/revolving light is designed as an attention-getting 360-degree warning light. It has a built-in power supply, a very low current requirement, and a 5-year warranty. It is sonic welded for protection against the environment, and a great alternative for electric cars and forklifts.
NCI SKU: GL1452
Light Quadflash Strobe Perm. Mt
Powder Painted Black Aluminum base strobe light with universal mounting flange base. New, improved lens design for greater light output. Q465-X is our quad-flash, construction grade, high impact strobe light.
NCI SKU: GL1435
LIGHT RENTAL RED STAKE MOUNT FOR LOW PROFILE AIRPORT BARICADE
Use with low profile airport barricades to demarcate closed taxiway and runways.
NCI SKU: VL1425
Light Square Led Bolt Mt #WLED-5S 1200 Lumen Economy Work Light
- – 12/24V Square LED Economy Work Light
– 1.2 Amp Draw @ 12.8V – Includes 5 High-Powered LEDs
– Sealed – water tight lens assembly, IP:68
– Single bolt mount, full tilt, 360 degree
– Diecast Alumunum housing
– Two surface mount brackets included w/hardware packet
– Thermal shock resistant, Oper Temp: -30C ~ +50C
– Includes 15” harness, viewing angle 60 degrees
– 2-Year Warranty
NCI SKU: GL1425
LITE ONLY S.B. FED SPEC “C” RENTAL
- Federal spec “”C”” steady burn light only
- 100 unit day minimun rental applies
NCI SKU: VL1415
No Parking Sign
Avaible in:
Cardboard Red-On-White
Wash. Dc R/W Cardboard
Parking Block
The rubber Park-It® parking curb is used to effectively guide cars when pulling into a parking space. It is profiled at 4″ high, safeguarding potential damage to today’s low, front end car designs. They are more resistant than concrete or plastic curbs. Easily installed on asphalt with rebar spikes or concrete with lag bolts and lead shields. Installation hardware is sold separately.
- 100% recycled rubber
- Ideal for indoor or outdoor parking
- Molded highly reflective tape
- Simple installation by one person
- Will not chip, crack, or fade
- 1/10th the weight of standard concrete curb
- Warranty: 3 years on the product; 1 year on the tape (under normal use)
| SKU#: | NCI SKU#: | Info: | Installation |
| 16101 | GB1445N | 6′ Parking Block w/ yellow tape | 4 spikes needed |
| 16201 | GB1450N | 6′ Parking Block w/ white tape | 4 spikes needed |
| 16201B | GB1456N | 6′ Blue Parking Block w/ white tape | 4 spikes needed |
| 91400 | GB1460 | 14″ Rebar Spike | for asphalt use |
| 91500 | GB1462 | 6″ Lag Bolt | for concrete use |
| 91501 | GB1463 | Lead Shield | for concrete use |