
SIGN WORK VEHICLE FREQUENT TURNS 48X18 .063 B/O DG
Work Vehicle Frequent Turns sign. Made of .063 aluminum with fluorescent orange diamond grade reflective sheeting and black letters. Size 48″x18″. Meets Virginia DOT specification G20-V1a.
**This sign replaces the old “Do not follow” G20-V1 specification. All old signs must be replaced with “frequent turns” G20-V1a signs by July 1st, 2017.
NCI SKU: SG2020D Sign Layout G20-V1a
Sign, Base Hardware pack of 4 bolts and plastic anchors
Multi-Purpose Anchor Kit, contains 4 each: 3” Plastic Anchors, 4” Lag Screws, Metal Washers
NCI SKU: GS1215

Slow Moving Vehicle Emblem
During daylight, the bright fluorescent orange solid triangle in center of SMV emblem is highly visible. Gains attention and recognition of approaching motorists at distances exceeding 1/5 mile. At night the red retro reflective conspicuity tape border glows brilliantly in path of approaching auto headlights. Meets ASAE standards. Hollow red triangle immediately identifies a slow moving vehicle. Meets new regulations.
NCI SKU: GE1085

Speed Bump
The Easy Rider® speed bump is available in 4′ and 6′ lengths. End caps are available to protect the speed bump ends and vehicles. Easily installed on asphalt with rebar spikes or concrete with lag bolts and lead shields. Installation hardware is sold separately.
- 100% recycled rubber
- Reduces speed to 2-5 mph
- Molded highly reflective tape
- Product can be installed in sections to create varying lengths
- Will not warp, crack, chip or rot
- Channeled bottom for cabling and piping
- Warranty: 3 years on the product; 1 year on the tape (under normal use)
SKU#: | NCI SKU#: | Info: | Installation |
24111 | GB1470N | 4′ Speed Bump w/ yellow tape | 3 spikes needed |
26111 | GB1475N | 6′ Speed Bump w/ yellow tape | 4 spikes needed |
26999 | GB1476N | Speed Bump End Cap | 1 spike needed |
91400 | GB1460 | 14″ Rebar Spike | for asphalt use |
91500 | GB1476N | 6″ Lag Bolt | for concrete use |
91501 | GB1476N | Lead Shield | for concrete use |

Speed Hump
The Safety Rider® V mini speed hump is an economical speed reduction device made from vulcanized rubber. Unlike asphalt, the rubber mini hump is molded to spec creating a uniform and reliable solution to slow vehicle traffic. The mini humps are simple to install and do not require road closures or ideal weather conditions. Installs with lag bolts, washers, and shields which are included with the product.
- 100% recycled rubber
- Dimensions: (L) 35.4″ x (W) 19.7″ x (H) 2″
- Interlocking tongue and groove system
- Molded highly reflective tape
- Product can be installed in sections to create varying lengths
- Will not warp, crack, chip or rot
- Warranty: 3 years on the product; 1 year on the tape (under normal use)
SKU#: | NCI SKU#: | Info: |
23500V | GH1945 | Speed Hump |
23501V | GH1946 | End Cap (female) |
23502V | GH1947 | End Cap (male) |

Square Sign Post
- Compatible with all existing square posts
- Mating tube sections allow for fast, safe, ground-level installations
- Ground anchor posts allow for rapid replacement installations when necessary
- Square tube sections provide superior resistance to wind and other forces over U- channel or round posts
- The Ulti-Mate Sign Support System provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware
- FHWA approved as meeting safety requirements for sign supports

Standard Fast Dry Waterborne Traffic Marking Paint
A user friendly, high solids, fast drying waterborne traffic paint suitable for application by airless or air atomized equipment. May be used to stripe roadways, airports and parking lots with or without pressure applied glass beads. It offers all of the benefits of a water reducible paint, and quickly dries to a no track condition. Performance and color properties of this paint meets TT-P-1952E Types I & II.

Stencil Handicap Large 39″ Duro
Stencils are produced from the best grade of polyethylene plastic you can use for a stencil. Other products not manufactured with this superior grade of polyethylene plastic will not give you the same lasting service as ours. Polyethylene plastic is made for easy maintenance. The non-porous, slick surface allows the dried paint build-up to simply flake off after drying when properly taken care of. Stencils are best stored flat and in moderate temperature when not in use. *All of our stencils are designed around D.O.T. specifications whenever applicable.
1/16” (.060 mil.) thick
sku# SS0310D

STOP SLOW 72″ HANDLE ONLY
STOP SLOW PADDLE 72″ HANDLE ONLY
NCI SKU: SS1040
USE WITH SS1045 STOP SLOW PADDLE

STOP SLOW PADDLE 24″ with 12″ handle
SIGN STOP SLOW PADDLE HIGH INTENSITY REFLECTIVE BOTH SIDES Handle Length: 12″; Staff Length: No Staff
NCI SKU: SS1045
Use with SS1040 72″ HANDLE

Stripe Inverted Tip Marker
- A fast drying permanent marking paint applied in an inverted position
- Produces vivid lines
- Safe on grass and long lasting
- This non-clogging formulation will not wash away
- Comes with Seymour’s patented tear away spray-thru cap

Stripe Solvent Base Extra Traffic Marker
Specifically formulated for line striping over new or freshly coated asphalt
Makes 2-inch to 4-inch wide stripes that are traffic ready in 60 minutes
Good hide with one application
One can will stripe approximately 250 linear feet
VOC Compliant solvent base paint
NCI SKU: WP8610

Stripe Temporary Inverted Tip Marker
This quick drying marking paint lasts until it is subjected to moisture
Marks wash away after a few heavy rains or with a garden hose
Comes with Seymour’s patented tear away cap
VOC Compliant solvent base paint
Compatible with the Seymour Z-605 Stripe Gun and the Seymour Z-606 Stripe Wand (not included)
Color: Orange Fluorescent

Stripe Traffic Marking Machine
Easy to use machine applies crisp, even 2 in. -4 in. lines on any hard surface.
Designed exclusively for Stripe Traffic paints,
Holds 12 cans
Replacement parts available
NCI SKU: EM1032

Stripe Wand
For use with a variety of Seymour stripe inverted tip marking paints (those with a straight tip). This lightweight tool is ideal for a wide range of precise marking applications. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
- As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment.
- This means fulfilling our legal and social responsibilities within the community.
- Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers.
- Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
NCI SKU: EM1034

Stripe Water Base Traffic Marker
Makes stripes 2″ to 4″ wide with our Stripe Z-604 traffic machine.
The universal spray head also works in competitive marking machines.
For marking stencils or curbs, it can be actuated by hand or with the Stripe Z-608 traffic marking wand.
Use for parking lots, warehouses, tennis courts, playgrounds, landing strips, basketball courts, etc.
Dries to touch in 15 minutes.
Color: Yellow
NCI SKU: WP8600

Strobe Lights 625 Series
The 625 lights are a bright, powerful, economical, line of multi-voltage quad flash and double flash strobe lights. The Q625 features 75 quad FPM for an exceptional attention getting display. The DFS625 has the same housing with 75 double FPM and is also available in 120V AC. The 625 series comes standard with a black ABS plastic base and fresnel lens. The 625 lights have an optional flange mount base and/or 6″ tall dome for greater light output and a higher profile. The 625P strobe lights include a 1/2″ pipe mount plate added to the base of the light. Magnet mount versions include a 75 lb. pull magnet and a 15′ coiled cord & cigarette lighter plug with a built in ON/OFF switch.
- Amber/Clear

Traffic Paint
Options
Sku# | NCI Sku# | Description |
---|---|---|
L9-450 | WP2180 | White Latex |
L9-451 | WP2190 | Yellow Latex |
L9-454 | WP2175 | Blue Latex |
L9-459 | WP2185 | Black Latex |
S9-450 | WP2195 | White Alkyd |
S9-451 | WP2205 | Yellow Alkyd |
S9-459 | WP2200 | Black Alkyd |