SIGN SCHOOL XING SYMBOL 30″ × 30″ .100 aluminum Black symbol/FYG 3M DG
Sign School Crossing symbol black symbol on 3M Fluorescent Yellow Green (FYG) Diamond Grade
.100″ aluminum substrate
NCI SKU: SS1100D
SIGN SIDEWALK CLOSED 24×18 ACM B/W HI
SIGN R9-9 SIDEWALK CLOSED 24″X18″ ALUMINUM COMPOSITE MATERIAL (ACM) BLACK / WHITE HIGH INTENSITY PRISMATIC (HIP)
NCI SKU: SM2000N
SIGN SIDEWALK CLOSED AHEAD CROSS HERE on ACM 24″x30″ black letters on white 3M HIP reflective
Sign SIDEWALK CLOSED AHEAD (arrow) CROSS HERE on Aluminum Composite Material (ACM)
Black letters and border on white 3M High Intensity Prismatic (HIP) retroreflective sheeting
NCI SKU: SM2000HI
Sign Stand X-550 Spring Loaded W/Brackets for rigid signs
Dual vertical steel coil-springs provide optimal wind-deflection and superior lateral stability. Legs and full-mast are galvanized steel for maximum rust and corrosion resistance.
X-550 Stands™ with Kick-Lever leg release system.Telescoping mast holds Rigid Signs 30” above grade.
Two-position legs adjust for maximum stability, uneven terrain/shoulders, or optimal height.
X-550 Stands are NCHRP-350 Accepted for use with ALL Rigid and Roll-Up Signs. WZ-07, WZ-13, WZ-56, WZ-59, WZ-78A, WZ-103A, and WZ-122
Sign sold separately
***Includes bracket for mounting Rigid signs*** For Roll-up sign brackets use SS1023R
NCI SKU: SS1023E
Sign Stand X-550 Spring Loaded W/Brackets for roll-up signs
Dual vertical steel coil-springs provide optimal wind-deflection and superior lateral stability. Legs and full-mast are galvanized steel for maximum rust and corrosion resistance.
X-550 Stands™ with Kick-Lever leg release system.Telescoping mast holds Rigid Signs 30” above grade.
Two-position legs adjust for maximum stability, uneven terrain/shoulders, or optimal height.
X-550 Stands are NCHRP-350 Accepted for use with ALL Rigid and Roll-Up Signs. WZ-07, WZ-13, WZ-56, WZ-59, WZ-78A, WZ-103A, and WZ-122
Sign sold separately
***Includes bracket for mounting Roll-up signs*** For Rigid sign brackets use SS1023E
NCI SKU: SS1023R
Sign Stand X602 With Brackets for Rigid Signs
- NCHRP 350 compatibility- crash test results available
- Complies with MUTCD standards
- Legs lock into position when fully extended
- All aluminum and steel construction
- Telescoping aluminum legs with two position height adjustment and anti-skid foot pads
- Minimum height from the ground to bottom of 48″ x 48″ sign: 60”
- Approved for plywood, aluminum, and all other sign substrates
- Dual vertical steel coil-springs provide optimal wind-deflection and superior lateral stability
- Roll Up sign brackets available (sold separately)
NCI SKU: SS1025N
SIGN STENCIL HANDICAP
21.5″” Tall x 19″” Wide Stencil
D.O.T. Specifications (S-3021)
Standard Handicap Symbol
Also available as 39″” Tall x 34″” Wide x 4″” Bar
D.O.T. Specifications (S-3039)
NCI SKU: SS300D
Sign STOP ROLL UP 36″ x 36″ DIAMOND GRADE w/ LONG THIRD BATTEN
STOP SIGN ROLL UP DG 36″X36″ OCTAGON WHITE/RED WITH LONG THIRD BATTEN
Roll-Up C-Signs™ were specifically engineered for
use on C-Series Compact Stands™. With a sturdier
vertical batten, C-Signs™ allow for optimal wind
deflection when mounted on the “Half-Mast” of
our fiberglass leaf-spring Compact C-Stands™ (or
on another manufacturer’s equivalent).
SS1020D
SIGN TRUCKS ENTERING ROADWAY 48X48 ACM BLACK/FLUORESCENT ORANGE DIAMOND GRADE
ALUMINUM COMPOSITE MATERIAL (ACM)
48″X48″
BLACK LETTERS ON FLUORESCENT ORANGE 3M DIAMOND GRADE REFLECTIVE
NCI SKU: SW5502D
SIGN UNEVEN PAVEMENT 48X48 ACM B/O DG.
SIGN UNEVEN PAVEMENT 48″X48″ ALUMINUM COMPOSITE MATERIAL (ACM) BLACK/FLUORESCENT ORANGE RETROREFLECTIVE
NCI SKU: SW8702D
SIGN VAN ACCESSIBLE GREEN/WHITE 12″×6″ .080 ALUMINUM HIP
ALUMINUM
12″ X 6″
GREEN LETTERS AND BORDER
3M WHITE HIGH INTENSITY PRISMATIC REFLECTIVE SHEETING
NCI SKU: SS6200
SIGN VAN ACCESSIBLE WHITE LETTERS /BLUE 12″×6″ .080″ ALUMINUM
ALUMINUM
12″ X 6″
WHITE LETTERS AND BORDER
BLUE BACKGROUND
3M HIGH INTENSITY PRISMATIC REFLECTIVE SHEETING
NCI SKU: SS6205
SIGN W1-6 ARROW 48X24 ACM BLACK/FLUORESCENT ORANGE DIAMOND GRADE REFLECTIVE
SIGN W1-6 ARROW RIGHT OR LEFT 48″X24″ ALUMINUM COMPOSITE MATERIAL (ACM)
NCI SKU: SW1602
SIGN W16-7PL ARROW DOWN LEFT 24X12 BLACK/FLUORESCENT YELLOW GREEN DIAMOND GRADE REFLECTIVE
SIGN W16-7PL ARROW DOWN LEFT .100″ ALUMINUM 24X12 BLACK/FLUORESCENT YELLOW GREEN DIAMOND GRADE REFLECTIVE
NCI SKU: SW167PL
SIGN WORK VEHICLE FREQUENT TURNS 48X18 .063 B/O DG
Work Vehicle Frequent Turns sign. Made of .063 aluminum with fluorescent orange diamond grade reflective sheeting and black letters. Size 48″x18″. Meets Virginia DOT specification G20-V1a.
**This sign replaces the old “Do not follow” G20-V1 specification. All old signs must be replaced with “frequent turns” G20-V1a signs by July 1st, 2017.
NCI SKU: SG2020D Sign Layout G20-V1a
Sign, Base Hardware pack of 4 bolts and plastic anchors
Multi-Purpose Anchor Kit, contains 4 each: 3” Plastic Anchors, 4” Lag Screws, Metal Washers
NCI SKU: GS1215
Slow Moving Vehicle Emblem
During daylight, the bright fluorescent orange solid triangle in center of SMV emblem is highly visible. Gains attention and recognition of approaching motorists at distances exceeding 1/5 mile. At night the red retro reflective conspicuity tape border glows brilliantly in path of approaching auto headlights. Meets ASAE standards. Hollow red triangle immediately identifies a slow moving vehicle. Meets new regulations.
NCI SKU: GE1085
Square Sign Post
- Compatible with all existing square posts
- Mating tube sections allow for fast, safe, ground-level installations
- Ground anchor posts allow for rapid replacement installations when necessary
- Square tube sections provide superior resistance to wind and other forces over U- channel or round posts
- The Ulti-Mate Sign Support System provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware
- FHWA approved as meeting safety requirements for sign supports
Stencil Handicap Large 39″ Duro
Stencils are produced from the best grade of polyethylene plastic you can use for a stencil. Other products not manufactured with this superior grade of polyethylene plastic will not give you the same lasting service as ours. Polyethylene plastic is made for easy maintenance. The non-porous, slick surface allows the dried paint build-up to simply flake off after drying when properly taken care of. Stencils are best stored flat and in moderate temperature when not in use. *All of our stencils are designed around D.O.T. specifications whenever applicable.
1/16” (.060 mil.) thick
sku# SS0310D
STOP SLOW 72″ HANDLE ONLY
STOP SLOW PADDLE 72″ HANDLE ONLY
NCI SKU: SS1040
USE WITH SS1045 STOP SLOW PADDLE
STOP SLOW PADDLE 24″ with 12″ handle
SIGN STOP SLOW PADDLE HIGH INTENSITY REFLECTIVE BOTH SIDES Handle Length: 12″; Staff Length: No Staff
NCI SKU: SS1045
Use with SS1040 72″ HANDLE
U-Channel Sign Post
U-Channel posts are for mounting standard traffic signs.
3/8″ diameter holes spaced 1 inch on center entire length of post
Available both Green coated or Galvanized
2 LB per foot
| SKU#: | NCI SKU#: | Info: |
| SP1 | SP1008 | Green U-Channel 8′ 2Lb/Ft |
| SP2 | SP1010 | Green U-Channel 10′ 2Lb/Ft |
| SP3 | SP1010G | Galvanized U-Channel 10′ 2Lb/Ft |
| SP4 | SP1012 | Green U-Channel 12′ 2Lb/Ft |
| SP5 | SP1012G | Galvanized U-Channel 12′ 2Lb/Ft |