Flag Holder Sign
Included on ALL X-Stand Series Masts; Displays up to 3 flags (sold separately see GF2100 and GF2125)

Permanent Base For In Street Pedestrian Crossing Signs
Quick Release Fixed Base is a surface mount base with our unique quick release feature designed for permanent or long term applications.
This base’s Quick Release feature provides the ability to change out or remove products in less than five seconds without the use of tools or special equipment.
Surface Mount Base, Quick Release, Black
NCI SKU: GS1205
Requires hardware; see GS1215

Portable Rubber Base for In-Street Pedestrian signs
One Base’s portable design and ergonomic carrying handle make it ideal for situations where rapid deployment of temporary signage is needed. One Base is easily transported and perfect for temporary applications. One Base is made of 100% recycled rubber and comes standard with our quick release feature that allows upright installation and removal in less than 5 seconds.
NCI SKU: GS1210
Use with GS1200QR

Quick Release System Pin Only for In Street Pedestrian Sign
Pull Pin Only, Quick Release, replacement
NCI SKU: GS1220

Rigid Sign Bracket
Rigid sign holder only, replaces damaged, lost or missing sign holders. Fits SS1025N (X-600) sign stands. Two needed per sign stand.
sku# SS1026N

Round Sign Post 2 3/8″ DIAMETER x 12′ LONG
- 2 3/8″ O.D. Galvanized steel pipe
- 16 gauge
- .065 wall
- 12′
Sign Bracket R/U
SIGN BRACKET ONLY FOR ROLL UP SIGN FITS SS1023R AND SS1023E SIGN STANDS
ONLY ONE NEEDED PER STAND
NCI SKU: SS1027N

Sign Hardware
SKU#: | NCI SKU#: | Info: |
SH1 | SS1003 | Cap For U-Channel |
SH2 | SS1007 | Cap For Street Name |
SH3 | SS1008 | Cross For St. Name |

Sign In-Street Pedestrian Crosswalk Signs
The In-Street Pedestrian Crosswalk Sign provides enhanced conspicuity at un-signalized intersections in order to alert motorists to local laws concerning yielding to or stopping for pedestrians in crosswalks. The effectiveness of these pedestrian crosswalk signs have been repeatedly supported by independent testing to demonstrate distinct changes in motorist behavior and accident incidence following installation.
R1-6a STOP emblem required in Maryland and Washington DC.
NCI SKU: GS1200QR
Requires a base; see GS1205 or GS1210

Sign Overlay LEFT 36×12 for 60×60 RU signs
Construction Signs are designed for use in Temporary Traffic Control zones. They provide the same function as Yellow Warning Signs, but in a temporary application. Properly set up work zones give drivers plenty of advance notice to react to the changed traffic situations.

Sign Post Base 36″ 12 GAUGE
SIGN POST BASE SQUARE ULT-MATE Size: 36″ Galvanized 12 Gauge 2.25″ x 2.25″
NCI SKU: SP2236

Sign Post Base Square 2.5″ x 36″ 7 gauge galvanized
- Compatible with all existing square posts
- Mating tube sections allow for fast, safe, ground-level installations
- Ground anchor posts allow for rapid replacement installations when necessary
- Square tube sections provide superior resistance to wind and other forces over U- channel or round posts
- The Ulti-Mate Sign Support System provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware
- FHWA approved as meeting safety requirements for sign supports

Sign Post Corner Bolt & Nut
A bent bolt designed to attach a sign to square tubing or to attach a square tube post to a square tube anchor up to 2 1/2″. Includes flange nut with serrated face.
NCI SKU: SP2235

Sign Stand X-550 Spring Loaded W/Brackets for rigid signs
Dual vertical steel coil-springs provide optimal wind-deflection and superior lateral stability. Legs and full-mast are galvanized steel for maximum rust and corrosion resistance.
X-550 Stands™ with Kick-Lever leg release system.Telescoping mast holds Rigid Signs 30” above grade.
Two-position legs adjust for maximum stability, uneven terrain/shoulders, or optimal height.
X-550 Stands are NCHRP-350 Accepted for use with ALL Rigid and Roll-Up Signs. WZ-07, WZ-13, WZ-56, WZ-59, WZ-78A, WZ-103A, and WZ-122
Sign sold separately
***Includes bracket for mounting Rigid signs*** For Roll-up sign brackets use SS1023R
NCI SKU: SS1023E

Sign Stand X-550 Spring Loaded W/Brackets for roll-up signs
Dual vertical steel coil-springs provide optimal wind-deflection and superior lateral stability. Legs and full-mast are galvanized steel for maximum rust and corrosion resistance.
X-550 Stands™ with Kick-Lever leg release system.Telescoping mast holds Rigid Signs 30” above grade.
Two-position legs adjust for maximum stability, uneven terrain/shoulders, or optimal height.
X-550 Stands are NCHRP-350 Accepted for use with ALL Rigid and Roll-Up Signs. WZ-07, WZ-13, WZ-56, WZ-59, WZ-78A, WZ-103A, and WZ-122
Sign sold separately
***Includes bracket for mounting Roll-up signs*** For Rigid sign brackets use SS1023E
NCI SKU: SS1023R

Sign Stand X602 With Brackets for Rigid Signs
- NCHRP 350 compatibility- crash test results available
- Complies with MUTCD standards
- Legs lock into position when fully extended
- All aluminum and steel construction
- Telescoping aluminum legs with two position height adjustment and anti-skid foot pads
- Minimum height from the ground to bottom of 48″ x 48″ sign: 60”
- Approved for plywood, aluminum, and all other sign substrates
- Dual vertical steel coil-springs provide optimal wind-deflection and superior lateral stability
- Roll Up sign brackets available (sold separately)
NCI SKU: SS1025N

Sign STOP ROLL UP 36″ x 36″ DIAMOND GRADE w/ LONG THIRD BATTEN
STOP SIGN ROLL UP DG 36″X36″ OCTAGON WHITE/RED WITH LONG THIRD BATTEN
Roll-Up C-Signs™ were specifically engineered for
use on C-Series Compact Stands™. With a sturdier
vertical batten, C-Signs™ allow for optimal wind
deflection when mounted on the “Half-Mast” of
our fiberglass leaf-spring Compact C-Stands™ (or
on another manufacturer’s equivalent).
SS1020D
Sign, Base Hardware pack of 4 bolts and plastic anchors
Multi-Purpose Anchor Kit, contains 4 each: 3” Plastic Anchors, 4” Lag Screws, Metal Washers
NCI SKU: GS1215

Square Sign Post
- Compatible with all existing square posts
- Mating tube sections allow for fast, safe, ground-level installations
- Ground anchor posts allow for rapid replacement installations when necessary
- Square tube sections provide superior resistance to wind and other forces over U- channel or round posts
- The Ulti-Mate Sign Support System provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware
- FHWA approved as meeting safety requirements for sign supports

STOP SLOW 72″ HANDLE ONLY
STOP SLOW PADDLE 72″ HANDLE ONLY
NCI SKU: SS1040
USE WITH SS1045 STOP SLOW PADDLE

STOP SLOW PADDLE 24″ with 12″ handle
SIGN STOP SLOW PADDLE HIGH INTENSITY REFLECTIVE BOTH SIDES Handle Length: 12″; Staff Length: No Staff
NCI SKU: SS1045
Use with SS1040 72″ HANDLE

U-Channel Sign Post
U-Channel posts are for mounting standard traffic signs.
3/8″ diameter holes spaced 1 inch on center entire length of post
Available both Green coated or Galvanized
2 LB per foot
SKU#: | NCI SKU#: | Info: |
SP1 | SP1008 | Green U-Channel 8′ 2Lb/Ft |
SP2 | SP1010 | Green U-Channel 10′ 2Lb/Ft |
SP3 | SP1010G | Galvanized U-Channel 10′ 2Lb/Ft |
SP4 | SP1012 | Green U-Channel 12′ 2Lb/Ft |
SP5 | SP1012G | Galvanized U-Channel 12′ 2Lb/Ft |