AWT Rebar Tie Wire
$4.77
AWT Rebar Tie Wire is made from the softest annealed wire available to assure you that it will consistently form the perfect tie every time. From a saddle tie, to the wrap and saddle, to the figure eight, the pliability of AWT’s tie wire makes every tie a snap. 16 gauge Black Annealed tie wire is packaged with 20 each 3 pound coils per box.
Available by the roll or box quantity.
Related Products
Deep Bit Bronze Groover w/Wood Handle
Black Annealed American Wire Double Loop Wire Ties
Black Annealed American Wire Ties are made of dead-soft annealed wire – pliable, yet tough; easy to twist, but hard to break. 16 gauge x 6″ OR 8″ double loop tie
Magnesium Screed
- Made of Genuine Extru-Lite Magnesium – 30% lighter than aluminum
- Built for strength and rigidity
Wide Magnesium Hand Float w/Wood Handle
Welded Wire Mesh for concrete reinforcing
Insteel produces a broad range of standard welded wire reinforcement products (“SWWR”) in both rolls and sheets. When properly placed in concrete slabs on grade, SWWR helps reinforce the concrete after cracking and is a critical element in its performance. Our SWWR products conform to ASTM A1064 (replaces A185 for smooth welded wire and A497 for deformed welded wire).
| SKU | Size | Gauge | W/D | Spacing |
| AW1070 | 5’X10′ Sheet | 10/10 | W1.4/W1.4 | 6×6 |
| AW1075 | 5’X150′ Roll | 10/10 | W1.4/W1.4 | 6×6 |
| AW1095 | 5’X10′ Sheet | 8/8 | W2.1/W2.1 | 6×6 |
| AW1100 | 5’X150′ Roll | 8/8 | W2.1/W2.1 | 6×6 |
| AW1110 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 4×4 |
| AW1120 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 6×6 |
| AW1125 | 5’X150′ Roll | 6/6 | W2.9/W2.9 | 6×6 |
| AW1145 | 5’X10′ Sheet | 4/4 | W4/W4 | 6×6 |
4-Hole Threaded Bracket Assembly
This complete 4-hole bracket assembly is uniquely designed to adjust 180
Steel Concrete Vibrator Head
Oztec HP 150 OZ 1″ x 14″ Vibrator Steel Pencil Head produces the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec’s electric or gasoline powered motors and choice of flexible shafts. The results are exceptional!
Reviews
There are no reviews yet.