Cement Trowel w/Camel Back Wood Handle
Call for price
This flat trowel is ideal for slabs, sidewalks, driveways, and everything in between. Finish concrete to the perfect finish with this trowel. Curved camel back wood handle on a high-strength, lightweight aluminum mounting. Proudly made in the USA.
- Compression fit stainless steel rivets
- Guaranteed “NO TURN” handle design locks handle to mounting
Related Products
Outside Curb & Sidewalk Tool w/Wood Handle
Mag Screed
- Made of Genuine Extru-Lite Magnesium – 30% lighter than aluminum
- Built for strength and rigidity
Welded Wire Mesh for concrete reinforcing
Insteel produces a broad range of standard welded wire reinforcement products (“SWWR”) in both rolls and sheets. When properly placed in concrete slabs on grade, SWWR helps reinforce the concrete after cracking and is a critical element in its performance. Our SWWR products conform to ASTM A1064 (replaces A185 for smooth welded wire and A497 for deformed welded wire).
| SKU | Size | Gauge | W/D | Spacing |
| AW1070 | 5’X10′ Sheet | 10/10 | W1.4/W1.4 | 6×6 |
| AW1075 | 5’X150′ Roll | 10/10 | W1.4/W1.4 | 6×6 |
| AW1095 | 5’X10′ Sheet | 8/8 | W2.1/W2.1 | 6×6 |
| AW1100 | 5’X150′ Roll | 8/8 | W2.1/W2.1 | 6×6 |
| AW1110 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 4×4 |
| AW1120 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 6×6 |
| AW1125 | 5’X150′ Roll | 6/6 | W2.9/W2.9 | 6×6 |
| AW1145 | 5’X10′ Sheet | 4/4 | W4/W4 | 6×6 |
Wide Magnesium Hand Float w/ProForm Handle
Flexible Vibrator Shaft with Quick Disconnect Coupler
Oztec Concrete Vibrator 21′ FS 21 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec power units, are reversible (doubling their service life), and come supplied with “quick change” adapters
Threaded Aluminum Handle
This 72″ lightweight aluminum threaded bull float handle features a 1-3/4″ diameter for easy handling. Silver aluminum prevents hands from turning black caused by oxidation. Swaged design fits multiple handles together without extra inserts. This handle fits on Kraft double tilt action float brackets (CC270, CC294) with the use of handle adapters. A threaded plug in one in allows for the connection of multiple handles. Proudly made in the USA. SAFETY FIRST: Metal handles should not be used near electrical wires.
- Molded thread plugs in each end join handles together
- Fits bull float/fresno threaded brackets
Big Bit Bronze Groover w/Wood Handle
Rebar Tie Wire PVC Coated
American Wire Tie was the first to introduce PVC coated Rebar Tie Wire to the construction industry. For use with epoxy-coated rebars, our yellow PVC wire is produced to the highest standards and quality, with a minimum of 7 mil thickness to prevent cutting the epoxy coating. Packaged with 20 3# coils to a 60 lb. carton.
Available by the roll or carton.
Reviews
There are no reviews yet.