Outside Curb & Sidewalk Tool w/Wood Handle
Call for price
Related Products
4-Hole Threaded Bracket Assembly
This complete 4-hole bracket assembly is uniquely designed to adjust 180
Black Annealed American Wire Double Loop Wire Ties
Black Annealed American Wire Ties are made of dead-soft annealed wire – pliable, yet tough; easy to twist, but hard to break. 16 gauge x 6″ OR 8″ double loop tie
Rebar Tie Wire PVC Coated
American Wire Tie was the first to introduce PVC coated Rebar Tie Wire to the construction industry. For use with epoxy-coated rebars, our yellow PVC wire is produced to the highest standards and quality, with a minimum of 7 mil thickness to prevent cutting the epoxy coating. Packaged with 20 3# coils to a 60 lb. carton.
Available by the roll or carton.
Mag Screed
- Made of Genuine Extru-Lite Magnesium – 30% lighter than aluminum
- Built for strength and rigidity
Welded Wire Mesh for concrete reinforcing
Insteel produces a broad range of standard welded wire reinforcement products (“SWWR”) in both rolls and sheets. When properly placed in concrete slabs on grade, SWWR helps reinforce the concrete after cracking and is a critical element in its performance. Our SWWR products conform to ASTM A1064 (replaces A185 for smooth welded wire and A497 for deformed welded wire).
| SKU | Size | Gauge | W/D | Spacing |
| AW1070 | 5’X10′ Sheet | 10/10 | W1.4/W1.4 | 6×6 |
| AW1075 | 5’X150′ Roll | 10/10 | W1.4/W1.4 | 6×6 |
| AW1095 | 5’X10′ Sheet | 8/8 | W2.1/W2.1 | 6×6 |
| AW1100 | 5’X150′ Roll | 8/8 | W2.1/W2.1 | 6×6 |
| AW1110 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 4×4 |
| AW1120 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 6×6 |
| AW1125 | 5’X150′ Roll | 6/6 | W2.9/W2.9 | 6×6 |
| AW1145 | 5’X10′ Sheet | 4/4 | W4/W4 | 6×6 |
Wide Magnesium Hand Float w/ProForm Handle
2-Hole Thread Bracket Assembly
Handle socket fits all 1-1/4″, 1-1/2″ or 1-3/4″ threaded extension handles
Flexible Vibrator Shaft with Quick Disconnect Coupler
Oztec Concrete Vibrator 21′ FS 21 OZ Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec power units, are reversible (doubling their service life), and come supplied with “quick change” adapters
Reviews
There are no reviews yet.