Rebar Tie Wire PVC Coated
$7.21
American Wire Tie was the first to introduce PVC coated Rebar Tie Wire to the construction industry. For use with epoxy-coated rebars, our yellow PVC wire is produced to the highest standards and quality, with a minimum of 7 mil thickness to prevent cutting the epoxy coating. Packaged with 20 3# coils to a 60 lb. carton.
Available by the roll or carton.
Related Products
Hi-Craft Vinyl Knife
Magnesium Screed
- Made of Genuine Extru-Lite Magnesium – 30% lighter than aluminum
- Built for strength and rigidity
Gold Standard Aluminum Concrete Placer w/Hook
Big Bit Bronze Groover w/Wood Handle
4-Hole Threaded Bracket Assembly
This complete 4-hole bracket assembly is uniquely designed to adjust 180
Black Annealed American Wire Double Loop Wire Ties
Black Annealed American Wire Ties are made of dead-soft annealed wire – pliable, yet tough; easy to twist, but hard to break. 16 gauge x 6″ OR 8″ double loop tie
Welded Wire Mesh for concrete reinforcing
Insteel produces a broad range of standard welded wire reinforcement products (“SWWR”) in both rolls and sheets. When properly placed in concrete slabs on grade, SWWR helps reinforce the concrete after cracking and is a critical element in its performance. Our SWWR products conform to ASTM A1064 (replaces A185 for smooth welded wire and A497 for deformed welded wire).
| SKU | Size | Gauge | W/D | Spacing |
| AW1070 | 5’X10′ Sheet | 10/10 | W1.4/W1.4 | 6×6 |
| AW1075 | 5’X150′ Roll | 10/10 | W1.4/W1.4 | 6×6 |
| AW1095 | 5’X10′ Sheet | 8/8 | W2.1/W2.1 | 6×6 |
| AW1100 | 5’X150′ Roll | 8/8 | W2.1/W2.1 | 6×6 |
| AW1110 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 4×4 |
| AW1120 | 5’X10′ Sheet | 6/6 | W2.9/W2.9 | 6×6 |
| AW1125 | 5’X150′ Roll | 6/6 | W2.9/W2.9 | 6×6 |
| AW1145 | 5’X10′ Sheet | 4/4 | W4/W4 | 6×6 |
Cement Trowel w/Camel Back Wood Handle
This flat trowel is ideal for slabs, sidewalks, driveways, and everything in between. Finish concrete to the perfect finish with this trowel. Curved camel back wood handle on a high-strength, lightweight aluminum mounting. Proudly made in the USA.
- Compression fit stainless steel rivets
- Guaranteed “NO TURN” handle design locks handle to mounting
Reviews
There are no reviews yet.