Lanyard 6′ Internal Shock Absorb
$39.82 – $87.98
The Guardian Fall Protection Internal Shock Lanyard is comprised of heavy duty outer polyester webbing, with a polyester core specifically designed to reduce the impact forces resulting from a fall. Because the shock absorption is built directly into the lanyard there is no need for an external shock absorber, making the Internal Shock Lanyard a particularly lightweight option.This lanyard is available in single or double leg models, and with either snap or rebar hook connectors.
Related Products
HARNESS PADDED 1 D-R
The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support.
Buckle configuration: Quick-Connect chest – Tongue & Buckle legs
5K Concrete Anchorage Connector
The Guardian Fall Protection 5K Concrete Anchorage Connector is designed for use in 12 inch thick cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 5K Concrete Anchorage Connector fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.
10K Concrete Anchorage Connector
The Guardian Fall Protection 10K Concrete Anchorage Connector is designed for use in 10 inch thick, cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 10K Concrete Anchorage Connector fits holes of 1 inch in diameter and 4
Lifeline Poly Steel Rope 50′ With Snap Hook End
The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick.
Edge Angel 30′ SRL
The Guardian Fall Protection Edge Angel SRL is designed specifically for Leading Edge work. It includes an integrated shock absorbing component that helps refocus forces away from the portion of the cable that comes into contact with the edge. While the ideal position for any attachment point is overhead, Leading Edge retractables play an important role in the construction industry because, frequently, the only viable attachment point is at foot level. Most SRLs on the marketplace are not certified for such applications, but the Heavy Duty Edge is no common SRL, and holds up against even the toughest use.
HARNESS PADDED 3 D-R
The Guardian Fall Protection Seraph Construction Harness is specially designed with six points of adjustment, dorsal and side D-rings, and improved elasticity in the shoulder and back for added comfort. It includes an integrated impact indicator that clearly identifies if it has been exposed to forces of a fall, lanyard keepers, and is easy to adjust.
HARNESS ROOF KIT
The Guardian Fall Protection Bucket of Safe-Tie is a roofing kit built for the roofer, by the roofer. It is one of the few kits available on the market that includes a lifeline with an integrated shock absorber, which allows the worker to never have to worry about incorporating an additional shock absorbing lanyard into their fall protection system. Removing the shock absorbing component from the worker
Heavy Duty Edge Series 50′ SRL
The Guardian Fall Protection Heavy Duty Edge Series SRL is designed specifically for Leading Edge work. It includes an integrated shock absorbing component that helps refocus forces away from the portion of the cable that comes into contact with the edge. While the ideal position for any attachment point is overhead, Leading Edge retractables play an important role in the construction industry because, frequently, the only viable attachment point is at foot level. Most SRLs on the marketplace are not certified for such applications, but the Heavy Duty Edge is no common SRL, and holds up against even the toughest use.
Reviews
There are no reviews yet.