HARNESS PADDED 1 D-R
The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support.
Buckle configuration: Quick-Connect chest – Tongue & Buckle legs
HARNESS PADDED 3 D-R
The Guardian Fall Protection Seraph Construction Harness is specially designed with six points of adjustment, dorsal and side D-rings, and improved elasticity in the shoulder and back for added comfort. It includes an integrated impact indicator that clearly identifies if it has been exposed to forces of a fall, lanyard keepers, and is easy to adjust.
10K Concrete Anchorage Connector
The Guardian Fall Protection 10K Concrete Anchorage Connector is designed for use in 10 inch thick, cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 10K Concrete Anchorage Connector fits holes of 1 inch in diameter and 4
5K Concrete Anchorage Connector
The Guardian Fall Protection 5K Concrete Anchorage Connector is designed for use in 12 inch thick cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 5K Concrete Anchorage Connector fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.
Lifeline Poly Steel Rope 50′ With Snap Hook End
The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick.
Edge Series 20′ SRL
The Guardian Fall Protection Edge Series 20′ cable Self Retracting Lifeline w/ snap hook. Its durable aluminum housing, high strength composite cable guide, and non-corrosive components all make this SRL supremely compact and lightweight. It incorporates a quick-action breaking system, and meets or exceeds all OSHA and ANSI standards.
The O-Torque Beamer, which is made from aluminum, stainless steel, and chrome-plated steel components, is suitable for both horizontal and vertical installations onto steel I and H beams, making it both a supremely versatile and durable anchorage connector. It is compatible with beams with widths ranging from 4–1/2″ – 12″, and flange thicknesses ranging from 1/2″ – 2″, and may be used in either fall arrest or fall restraint applications. Incredibly simple to install, the O-Torque Beamer can easily be moved between installation locations.
Lanyard 6′ Internal Shock Absorb
The Guardian Fall Protection Internal Shock Lanyard is comprised of heavy duty outer polyester webbing, with a polyester core specifically designed to reduce the impact forces resulting from a fall. Because the shock absorption is built directly into the lanyard there is no need for an external shock absorber, making the Internal Shock Lanyard a particularly lightweight option.This lanyard is available in single or double leg models, and with either snap or rebar hook connectors.
MK Edge Series 65′ SRL
The MK Premium Edge SRL is another great addition to our quality line of SRLs. It is both lightweight and supremely durable, and incorporates corrosion-resistant stainless steel and aluminum components to ensure superior functionality throughout the product lifetime.