MK Edge Series 65′ SRL

The Guardian Fall Protection Poly Steel Rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10% to 15%, but unlike Nylon, Poly Steel Rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light, and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly Steel is ten times stronger than Polypropylene, and while it may become fibrous, this is just a result of normal wear, and does not indicate it needs to be replaced. It is 5/8 inches thick.

The Guardian Fall Protection Edge Angel SRL is designed specifically for Leading Edge work. It includes an integrated shock absorbing component that helps refocus forces away from the portion of the cable that comes into contact with the edge. While the ideal position for any attachment point is overhead, Leading Edge retractables play an important role in the construction industry because, frequently, the only viable attachment point is at foot level. Most SRLs on the marketplace are not certified for such applications, but the Heavy Duty Edge is no common SRL, and holds up against even the toughest use.

The Guardian Fall Protection 5K Concrete Anchorage Connector is designed for use in 12 inch thick cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the concrete hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for Fall Arrest, Restraint, and Work Positioning applications, and has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 5K Concrete Anchorage Connector fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.

The O-Torque Beamer, which is made from aluminum, stainless steel, and chrome-plated steel components, is suitable for both horizontal and vertical installations onto steel I and H beams, making it both a supremely versatile and durable anchorage connector. It is compatible with beams with widths ranging from 4–1/2″ – 12″, and flange thicknesses ranging from 1/2″ – 2″, and may be used in either fall arrest or fall restraint applications. Incredibly simple to install, the O-Torque Beamer can easily be moved between installation locations.