Additional information
| Options |
|---|
Barrier Reflector Yellow 3″x3″
$3.28
PCBM-9 Uses yellow Diamond Grade reflective sheeting
- UV-stabilized polymers for long life in both work zones and permanent installations
- Typical applications include temporary and permanent concrete barriers, concrete bridge parapets and wooden guardrail posts
- PCBM bases are pre-drilled for either adhesive or bolt mounting
See SKU# GR1674W for white sheeting
Related Products
Quadguard Hex Nut
The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.
Download Quad Guard Manual
NCI SKU: GQ3028
Triton Barrier
The Triton Barrier® TL-3 System provides an improved and more permanent method for upgrading existing Triton Barriers to NCHRP 350, Test Level 3. The Triton TL-3 allows users to “forget the kit,” and features a new pedestal system that uses only a screwdriver and steel strap to easily attach to the existing barrier. After stacking the Triton Barrier on top of two new TL-3 pedestals, a
mild strength steel band straps each pedestal to the barrier, creating a single, more permanent unit. Once assembled, the Triton TL-3 creates positive, crashworthy protection up to 100 km/h (62 mph) that will help to prevent penetration into work areas. With the new easy-to attach pedestals, Triton Barrier’s center of gravity automatically adjusts to provide high- speed, NCHRP 350, TL-3 performance. As a portable barrier, the Triton TL-3 transports easily from site to site for fast deployment without the use of cranes or heavy equipment.
| SKU#: | NCI SKU#: | Info: |
| 3595020-0000 | GB2150 | Assy 6.5’Wh. |
| 3595020-0100 | GB2151 | Assy 6.5’Or. |
| 3595351-0000 | GB2155 | Tl3 Kit(2Kit) |
Quadguard Cart.
The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.
Download Quad Guard Manual
| SKU#: | NCI SKU#: | Imfo: |
| 3540010-0000 | GQ3047 | Type I |
| 3540020-0000 | GQ3050 | Type II |
Quadguard Flat Washer
The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.
Download Quad Guard Manual
NCI SKU: GQ3029
Quadguard Anchor 18″ Rod
The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.
Download Quad Guard Manual
NCI SKU: GQ3027
Quadguard Diaphragm
The QuadGuard® system is a potentially reusable, redirective, non-gating crash cushion for hazards ranging in width from 610 mm to 3200 mm (24″ to 126″). After those impacts observed within NCHRP 350 criteria, it has been observed that, potentially, the bulk of the system can be reused. The system consists of energy-absorbing Cartridges surrounded by a framework of Quad-BeamTM Panels. What constitutes a potentially reusable highway product should only be determined by a trained engineer, experienced in highway products, directed by the DOT, or other appropriate local highway authority. The QuadGuard® system utilizes two types of Cartridges in a “staged” configuration to address both lighter cars and heavier, high center-of-gravity vehicles. Its modular design allows the system length to be tailored to the design speed of a site. See Table A on Page 12 to determine the appropriate length system for a given speed.
Download Quad Guard Manual
| SKU#: | NCI SKU#: | Info: |
| 3540010-0000 | GQ3052 | Assy,24″ |
| 3540072-0000 | GQ3053 | Assy,30″ |
| 3540073-0000 | GQ3054 | Assy,36″ |
Tma Release Cable Assembly
The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.
NCI SKU: GT6239
Safe-Stop 180 Truck Mounted Attenuator
The Safe-Stop TMA with the 180º Tilt feature provides maximum protection with minimal length, weight and height. The 180º Tilt feature makes this TMA the shortest height TMA when in its storage mode, which is ideal for garage storage and low underpasses. The Safe-Stop 180º TMA folds at the center, reducing the total system’s height to just 2.08 m (6’10”) in the storage mode. The two cartridge sections literally stack on top of each other.
The Safe-Stop 180º TMA was successfully tested to NCHRP 350 TL-2 (70km/h – 43 mph) criteria when impacted in storage (folded) mode by a 2000 kg pickup truck.
Tested To Be The Tough TMA
– Successfully passed NCHRP 350 TL-3 100km/h mandatory criteria.
– Successfully passed NCHRP 350 TL-3 100km/h optional criteria.
– Successfully tested to NCHRP 350 TL-2 70km/h heavy vehicle criteria in storage mode.
– Withstands nuisance impacts up to 10 km/h (6 mph) with little or no damage.
– Successfully passed vibration, corrosion and water resistance tests.
Reviews
There are no reviews yet.