Mason Bank Sand 75 lb. bag

• Waterproof material with durable seam sealed construction
• 2″ wide CNSS reflective material
• Zipper/storm flap closure for weather protection
• Non-sparking snaps and zipper
• Adjustable wrist cuffs
• Lower front patch pockets with snap closure
• Left chest radio pocket
• Adjustable leg cuff straps

ANSI/ISEA 107 2010 Class 3 Compliant – Jacket. ANSI/ISEA 107 2010 Class E Compliant – Pants.

36″ Lute head with 7′ handle

Use an asphalt lute to ensure that asphalt is spread quickly and evenly. Level and smooth asphalt with a variety of head and handle options. Order complete tool or individual replacement components separately. The handle is made of light weight magnesium. A slightly thinner wall thickness on our economy grade line reduces the overall weight while the slightly larger handle diameter assures reasonable strength against bending. A slightly smaller handle diameter on our premium grade line allows hands to relax more while working and allows a heavier wall thickness to resist bending, without increasing the weight of the lute. No angle braces are needed. The end is capped with a rubber tip. The head is made of wear-resistant aluminum alloy. Aluminum alloy holds heat better, making scrape off easier and teeth will not bend easily as with magnesium heads. An 1/8” thick tee-beam has a smooth edge on one side and serrated edge on the other. The smooth edge is used for final finishing pass leaving asphalt ready for compaction. The serrated edge has blunted teeth with rounded notches, permitting mix to flow through easily without “gumming up.” Standard head is serrated with a full tooth at each end. An un-serrated head with a smooth edge on both sides is available upon request.

• Natural tampico bristles hold more water than nylon or plastic
• Softens when wet – popular for washing softer and finished surfaces
• 2″ bristle trim length