Lime Ripstop Bomber Jacket
- Durable waterproof seam sealed ripstop shell with fleece body & hood
- Hood fits into the collar or can be removed altogether
- Quilted sleeves for easy in and out arm access
- 2″ wide reflective material
- Adjustable cuffs with rubber pulls for easy use when wearing gloves
- Left and right chest mic tabs
- Right chest vertical pocket for wallet or other accessories
- Large left radio pocket
- Left and right outside slash pockets
- Left bicep 2-division pencil/pen pocket with drainage grommets
- Large vertical tablet pocket with zipper inside storm flap. Tablet can be accessed without unzipping the jacket
KOOL-ROD – Backer Rod for Cold-Applied Sealants
KOOL-ROD is a closed cell, polyethylene, flexible, rope-like foam joint backing material. This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds. KOOL-ROD is specifically designed as a compressible backing material to be used in conjunction with a wide variety of cold-applied joint sealants.
- Controls depth of sealant/Ensures proper joint design ratio.
- Forces sealant against joint sidewalls/Provides maximum sidewall adhesion.
- Sealants will not adhere to KOOL-ROD/ Eliminates three-sided joint adhesion failure.
- Closed-cell foam technology/Does not allow air or moisture entrapment.
- Easily compressible, lightweight/Installs quickly, stays in place.
- Easy to handle, smaller packaging/Added contractor convenience.
Markal Lumber Crayon #200 is a soft, standard-grade lumber crayon for general-use marking and works well in cold climates. The wax-based mark is weather- and UV-resistant.
- Known in construction trades as “”keel”” or layout chalk
- Formulated for weather- and fade-resistant marking on most surfaces
- Special softer formula allows for superior marking in cold climates
- Marking range: -20°F to 150°F (-29°C to 66°C)
- Made in U.S.A.
- Dozen crayon per box
SurePoxy HM is a 100% solids, two-component, moisture-insensitive, epoxy resin system. It is an all purpose, very high strength rigid adhesive designed for structural bonding of dry and damp materials free of standing water. It can be applied at temperatures as low as 50 degrees Fahrenheit. Meets: ASTM C-881 Types I, II, IV and V, Grade 2, Class C.