Additional information
| Weight | 75 lbs |
|---|
High Strength Concrete Mix
$5.42
A graded, washed and dried sand for multiple uses. Can be used in landscaping, custom cement mixes, traction and an underlayment for pavers. Ideal for landscaping projects.
- Meets ASTM spec c-33 for concrete sands
- Uniformly screened, coarse sand
- Use for landscaping applications
- Gritty, traction sand
Related Products
NAILS CASE HARD CUT #10 50-LB.
3 inch length
5/16″ head
Fluted
Approx. 78 each per pound
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
NCI SKU: EN1015
BRUSH WHITE WASH
- Use to apply waterproofing, water paints and cement cotaings to concrete blocks
- 5 rows of tampico bristle with 4″ trim length
- 6″ hardwood block with attached red handle
Lumber Crayon
Markal Lumber Crayon #200 is a soft, standard-grade lumber crayon for general-use marking and works well in cold climates. The wax-based mark is weather- and UV-resistant.
- Known in construction trades as “”keel”” or layout chalk
- Formulated for weather- and fade-resistant marking on most surfaces
- Special softer formula allows for superior marking in cold climates
- Marking range: -20°F to 150°F (-29°C to 66°C)
- Made in U.S.A.
- Dozen crayon per box
KOOL-ROD – Backer Rod for Cold-Applied Sealants
KOOL-ROD is a closed cell, polyethylene, flexible, rope-like foam joint backing material. This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds. KOOL-ROD is specifically designed as a compressible backing material to be used in conjunction with a wide variety of cold-applied joint sealants.
- Controls depth of sealant/Ensures proper joint design ratio.
- Forces sealant against joint sidewalls/Provides maximum sidewall adhesion.
- Sealants will not adhere to KOOL-ROD/ Eliminates three-sided joint adhesion failure.
- Closed-cell foam technology/Does not allow air or moisture entrapment.
- Easily compressible, lightweight/Installs quickly, stays in place.
- Easy to handle, smaller packaging/Added contractor convenience.
Contact Cement Brush
- Sturdy application brush
- Sanded wood handle
- Fine, stiff bristles
- 2″” wide
Reviews
There are no reviews yet.