Wheelbarrow Tire Only – Flat Free
Call for price
Flat Free tire to fit Jackson 6 cu. ft contractor wheelbarrows
Stripe Water Base Inverted Tip Marker
A fast drying permanent marking paint applied in an inverted position. Produces vivid lines and is safe on grass. This non-clogging formulation will not wash away. Comes with Seymour’s patented tear away spray-thru cap. Lead free colors. Meets APWA color standards. VOC Compliant. May be sprayed by hand or with the Z-605 marking gun or Z-606 marking wand. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
Quest Impact Attenuator System
The QUEST System is a simple redirective, non-gating crash cushion that has been completely tested and has successfully passed the entire NCHRP 350 test matrix at test levels two and three. The 70mph Quest System has been tested and accepted by the FHWA after successfully passing NCHRP 350 test 3-31. The QUEST System consists of a series of W-beam fender panels supported by diaphragms with an innovative integrated trigger mechanism at the nose that releases a “front assembly” during impacts to absorb the energy of impact. The system is designed to telescope rearward during head-on impacts to absorb the energy of such an impact and to redirect vehicles during side angle impacts. The system provides protection for hazard widths ranging from 24”-36”.
- Non-gating, redirective impact attenuator
- Performs effectively with design speeds up to 100 km/h (62 mph)
- Meets NCHRP 350 TL-3 (100 km/h / 62 mph)”
NAILS CASE HARD CUT #10 50-LB.
3 inch length
Approx. 78 each per pound
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
NCI SKU: EN1015
RAINCOAT ONLY CL-3 S/M LIME
- Waterproof material with durable seam sealed construction
- 2″” wide CNSS reflective material
- Zipper/storm flap closure for weather protection
- Non-sparking snaps and zipper
- Adjustable wrist cuffs
- Lower front patch pockets with snap closure
- Left chest radio pocket
- Adjustable leg cuff straps
ANSI/ISEA 107 2010 Class 3 Compliant – Jacket. ANSI/ISEA 107 2010 Class E Compliant – Pants.