Additional information
| Dimensions | 12 × 17 in |
|---|
Sign Overlay “3” for 60″x60″ Roll Up Diamond Grade
Call for price
Construction Signs are designed for use in Temporary Traffic Control zones. They provide the same function as Yellow Warning Signs, but in a temporary application. Properly set up work zones give drivers plenty of advance notice to react to the changed traffic situations.
Sign Overlay “3” 12″x17″ for 60″x60″ 2 RIGHT LANES CLOSED AHEAD see SS0981D
Related Products
Bolt Cutter
White Tampico
- Natural tampico bristles hold more water than nylon or plastic
- Softens when wet – popular for washing softer and finished surfaces
- 2″ bristle trim length
KOOL-ROD – Backer Rod for Cold-Applied Sealants
KOOL-ROD is a closed cell, polyethylene, flexible, rope-like foam joint backing material. This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds. KOOL-ROD is specifically designed as a compressible backing material to be used in conjunction with a wide variety of cold-applied joint sealants.
- Controls depth of sealant/Ensures proper joint design ratio.
- Forces sealant against joint sidewalls/Provides maximum sidewall adhesion.
- Sealants will not adhere to KOOL-ROD/ Eliminates three-sided joint adhesion failure.
- Closed-cell foam technology/Does not allow air or moisture entrapment.
- Easily compressible, lightweight/Installs quickly, stays in place.
- Easy to handle, smaller packaging/Added contractor convenience.
NAILS CASE HARD CUT #10 50-LB.
3 inch length
5/16″ head
Fluted
Approx. 78 each per pound
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
NCI SKU: EN1015
RAINCOAT ONLY CL-3 S/M LIME
- Waterproof material with durable seam sealed construction
- 2″” wide CNSS reflective material
- Zipper/storm flap closure for weather protection
- Non-sparking snaps and zipper
- Adjustable wrist cuffs
- Lower front patch pockets with snap closure
- Left chest radio pocket
- Adjustable leg cuff straps
ANSI/ISEA 107 2010 Class 3 Compliant – Jacket. ANSI/ISEA 107 2010 Class E Compliant – Pants.
SurePoxy HM
SurePoxy HM is a 100% solids, two-component, moisture-insensitive, epoxy resin system. It is an all purpose, very high strength rigid adhesive designed for structural bonding of dry and damp materials free of standing water. It can be applied at temperatures as low as 50 degrees Fahrenheit. Meets: ASTM C-881 Types I, II, IV and V, Grade 2, Class C.
Brush White Wash, No handle
- Soft tampico bristles spread out wallpaper without scratches or folds
- Two rows of bristles with 2-1/2″ trim are set in 8″ hardwood block with tapered handle hole
- Order handle separately
Reviews
There are no reviews yet.