Additional information
| Dimensions | 48 × 60 in |
|---|
Sign Rudg Stay In Lane
Call for price
Sign Rudg 48X60 B/W Stay In Lane R4-9
Construction Signs are designed for use in Temporary Traffic Control zones. They provide the same function as Yellow Warning Signs, but in a temporary application. Properly set up work zones give drivers plenty of advance notice to react to the changed traffic situations.
Black and white
Related Products
KOOL-ROD – Backer Rod for Cold-Applied Sealants
KOOL-ROD is a closed cell, polyethylene, flexible, rope-like foam joint backing material. This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds. KOOL-ROD is specifically designed as a compressible backing material to be used in conjunction with a wide variety of cold-applied joint sealants.
- Controls depth of sealant/Ensures proper joint design ratio.
- Forces sealant against joint sidewalls/Provides maximum sidewall adhesion.
- Sealants will not adhere to KOOL-ROD/ Eliminates three-sided joint adhesion failure.
- Closed-cell foam technology/Does not allow air or moisture entrapment.
- Easily compressible, lightweight/Installs quickly, stays in place.
- Easy to handle, smaller packaging/Added contractor convenience.
Quest Impact Attenuator System
The QUEST System is a simple redirective, non-gating crash cushion that has been completely tested and has successfully passed the entire NCHRP 350 test matrix at test levels two and three. The 70mph Quest System has been tested and accepted by the FHWA after successfully passing NCHRP 350 test 3-31. The QUEST System consists of a series of W-beam fender panels supported by diaphragms with an innovative integrated trigger mechanism at the nose that releases a “front assembly” during impacts to absorb the energy of impact. The system is designed to telescope rearward during head-on impacts to absorb the energy of such an impact and to redirect vehicles during side angle impacts. The system provides protection for hazard widths ranging from 24”-36”.
”
- Non-gating, redirective impact attenuator
- Performs effectively with design speeds up to 100 km/h (62 mph)
- Meets NCHRP 350 TL-3 (100 km/h / 62 mph)”
RAINCOAT ONLY CL-3 S/M LIME
- Waterproof material with durable seam sealed construction
- 2″” wide CNSS reflective material
- Zipper/storm flap closure for weather protection
- Non-sparking snaps and zipper
- Adjustable wrist cuffs
- Lower front patch pockets with snap closure
- Left chest radio pocket
- Adjustable leg cuff straps
ANSI/ISEA 107 2010 Class 3 Compliant – Jacket. ANSI/ISEA 107 2010 Class E Compliant – Pants.
Lime Brilliant Series Bomber Jacket
- Durable water proof and seam sealed shell
- Removable black quilted liner
- Hidden collar hood
- 2” wide 3M™ Scotchlite™
- Reflective Material with 3” contrast
- Reflective piping on collar, shoulders, hood and sleeve seams
- Adjustable cuffs
- Black bottom front and cuffs for durability
- Left chest radio pocket
- Two outside lower slash pockets with zippers
- Inside wallet pocket
Square Scrub Brush
- 8″ x 2-1/2″ wood block works in hand or
with a handle - Select cream-colored crimped plastic fill for
general cleaning, or tampico fill for
scrubbing with acid and lime removers
Reviews
There are no reviews yet.